no image yet
Roland · Sampler · 1987

Roland S-220

The Roland S-220 is a rack sampler from 1987, sold as a MIDI sound module that can record its own sounds. It plays 16 voices from four sample banks, A to D, and its Multi function lets it answer on several MIDI channels with different sounds. It has mic and line inputs, four separate outputs, an arpeggiator and a MIDI mono mode for Roland's GR guitar synthesizers. Sounds are stored on 2.8-inch Quick Disks, and the sound library of the S-10 keyboard can be used. A 1987 review gave sampling rates of 30 kHz and 15 kHz, for 4.4 or 8.8 seconds in total, described the S-220 as derived from the S-10 and replacing the MKS-100, and noted the limited capacity of Quick Disks. Memory is kept at power-off by a back-up battery that Roland advises replacing every five years. With Exclusive switched on, the S-220 sends each parameter change as a System Exclusive message, so edits can be recorded in a sequencer. Its sample data transfer sends the full samples of a structure with their wave and performance parameters, one-way or with handshaking, and Roland says the data can be copied to another S-220, an MKS-100 or an S-10.

SysEx messages

0 files

This instrument is still waiting for its first SysEx.

If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.

Upload a SysEx

SysEx guide

Manufacturer ID
41
Model ID
10
Default device ID
MIDI basic channel minus 1 (channel 1 = 00)

Receiving a dump

1. Press MIDI and go to MIDI:COMMON EXCLUSIVE. 2. Set it to ON (receive and transmit). 3. Set the S-220 to the MIDI channel used by the transmitting unit or file. 4. For a sample transfer also set Program Change ON, then press F1 and MIDI and choose Sample Data Rcv (handshake mode needs the receiver's MIDI Out connected back to the transmitter).

Sending a dump from the instrument

1. Turn MIDI Exclusive and Program Change ON on both units and set the same MIDI channel. 2. On the transmitter select the structure to send and press Enter. 3. Press F1 then MIDI and choose Sample Data Xmt Handshake mode or One way mode with Forward/Backward. 4. Press Enter. Any structure button stops the transfer; at the end the S-220 returns to Play mode.

Requesting a dump

In normal mode the S-220 recognizes RQ1 (11H): F0 41 0n 10 11, 3-byte address, 3-byte size, checksum, F7, and answers with DT1 for one parameter. Pressing LOAD on the panel sends a request for the parameter shown. Wave data addresses: 02 00 00 bank A, 06 00 00 B, 0A 00 00 C, 0E 00 00 D.

SysEx pitfalls

Exclusive is OFF in the manual's display. A transfer takes about 25 seconds per bank with handshake and about 45 seconds one-way. In normal mode only one parameter is sent or recognized per message and the size field is ignored.

Source: Roland S-220 Owner's Manual, MIDI functions p. 90, System Exclusive and Data Transfer pp. 94-96; MIDI Implementation v1.00 (appended) ↗

Specifications

Synthesis
Sampling at 30 kHz or 15 kHz
Polyphony
16 voices
Multitimbrality
Multi function: structures on separate MIDI channels (Multi modes 1-5)
Oscillators
Four sample banks (A-D), each structure can include two address groups
Filter
Digital filter as a wave modification function
Memory
Four banks A-D in battery-backed RAM; storage on 2.8-inch Quick Disk
Keyboard / format
19-inch rack module, 90 mm high
Outputs
4 output jacks, headphones
MIDI
MIDI In, Out, Thru

Known issues and maintenance

Back-up battery keeps the data at power-off; Roland says it should be replaced every five years by Roland service, possibly sooner on a used unit (owner's manual p. 6). The Quick Disk drive should not be knocked, especially while running.

Sources

to be verified

These notes have not been checked against the sources yet. Corrections are welcome in the comments.

  1. Roland S-220 MIDI Digital Sampler Owner's Manual (1987), scanned PDF read as page images ↗ — Features p. 2, back-up battery p. 6, sampling frequency p. 67, MIDI functions p. 90, System Exclusive and Data Transfer pp. 94-96 (copy to S-220, MKS-100, S-10), specifications p. 107; MIDI Implementation with model ID 10H and address map, MIDI Implementation Chart dated Apr. 30 1987
  2. Aaron Hallas, "Roland S220 Sampler", Music Technology, November 1987 ↗ — Review: 30/15 kHz, 4.4/8.8 s, 16 voices, multitimbral, four outputs, derived from S-10 and replacing MKS-100, price GBP 975

Comments

0

Sign in to write a comment.

An unhandled error has occurred. Reload 🗙

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.