no image yet
Roland · Sampler · 1990

Roland S-770

The Roland S-770 is a 16-bit stereo digital sampler in a three-unit rack, released in 1990 as Roland's flagship sampler. It plays 24 voices, samples at 22.05 to 48 kHz and has 2 MB of RAM, expandable to 16 MB, plus a 40 MB internal hard disk. Sounds are built in layers: samples are shaped in Partials with a time-variant filter (low-pass, high-pass or band-pass with resonance), amplifier and LFO, Partials are mapped in Patches, and Patches are combined in Performances inside a Volume. It was one of the first samplers to offer a colour monitor and mouse interface, with digital coaxial and optical I/O, XLR inputs, six individual outputs and SCSI. Sound On Sound wrote in 1990 that it had no direct rival in polyphony and sound quality, and Roland still describes the 700-series sound as warm. The S-770 sends and receives Roland System Exclusive messages for its sound parameters, addressed to Volumes, Performances, Patches, Partials and sample parameters; the manual presents them mainly as a link to computer editing software. Wave data itself travels by the MIDI Sample Dump Standard, one-way or with handshake, including loop points.

SysEx messages

0 files

This instrument is still waiting for its first SysEx.

If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.

Upload a SysEx

SysEx guide

Manufacturer ID
41
Model ID
34
Default device ID
Unit Number Off or 1-32 (device ID 00H-1FH); follows the Control Channel unless set to 17-32

Receiving a dump

1. Open Mode > System > MIDI > Config. 2. Set System Exclusive to On. 3. Set Unit Number to match the sending device (17-32 keeps it independent of the Control Channel).

Requesting a dump

Data request RQ1 (11H) with a 4-byte address and size is answered with DT1; handshake RQD (41H) is answered with DAT. Temporary area: 00 00 00 00 Volume, 00 01 00 00 Performances, 00 04 00 00 Patches, 00 08 00 00 Partials, 00 0C 00 00 Sample parameters.

SysEx pitfalls

Wave data is not part of the Roland SysEx: samples are exchanged by MIDI Sample Dump Standard (Mode > System > MIDI > Dump, matching Unit Numbers). Sound On Sound found sample dumps slow, with stereo samples sent one side at a time.

Source: Roland S-770 Owner's Manual, pp. 84, 90, 204-206 and MIDI Implementation (Jan. 19 1990) pp. 226-229 ↗

Specifications

Synthesis
16-bit stereo sampling, DI (Differential Interpolation) playback, 22.05 to 48 kHz
Polyphony
24 voices
Multitimbrality
Performances with multiple Parts, each with its own MIDI channel
Oscillators
Up to 512 samples in RAM; 2 MB RAM, 16 MB with RAS-770
Filter
TVF per Partial: low-pass, high-pass or band-pass, with resonance
Memory
In RAM: 1 Volume, 64 Performances, 128 Patches, 255 Partials, 512 Samples; 40 MB internal hard disk
Keyboard / format
3U rack module
Outputs
Stereo L/R, 6 individual outputs, headphones; coaxial and optical digital I/O
MIDI
MIDI In, Out, Thru

Sources

to be verified

These notes have not been checked against the sources yet. Corrections are welcome in the comments.

  1. Roland S-770 Owner's Manual with MIDI Implementation, Jan. 19 1990 (scanned PDF read as page images) ↗ — Features p. 4, System Exclusive p. 84, Sample Dump p. 90, MIDI window pp. 204-206, MIDI Implementation pp. 226-229 (model ID 34H, address map), chart p. 236, specifications p. 239
  2. Roland, A History of Roland Samplers ↗ — Release year 1990, 16-bit stereo sampling at up to 48 kHz, TVF and TVA, basis of the DJ-70
  3. Kendall Wrightson, Roland S770 Sampler, Sound On Sound, July 1990 ↗ — Review: UK price, filter, outputs, digital I/O, sample dump with an Akai S1000, verdict

Comments

0

Sign in to write a comment.

An unhandled error has occurred. Reload 🗙

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.