no image yet
Roland · Synthesizer · 2010

Roland SH-01 Gaia

The Roland GAIA SH-01 is a 37-key virtual analog synthesizer released in 2010. Each patch stacks three tones, and every tone has its own oscillator, filter, amplifier, envelopes and LFO, and the three tones are layered across the whole keyboard. The oscillators offer the classic analog waveforms, noise and a Supersaw, and the filter works as low-pass, band-pass, high-pass or peaking at 12 or 24 dB per octave. It plays up to 64 voices, stores 64 preset and 64 user patches, and can run on batteries. The GAIA uses Roland System Exclusive messages with model ID 00H 00H 41H. Its address map includes the 64 user patches, so they can be read with data requests and written back with DT1 messages, as well as the system settings and the patch being played.

Sign in to upload or comment

SysEx messages

0 files

This instrument is still waiting for its first SysEx.

If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.

Upload a SysEx

SysEx guide

Manufacturer ID
41
Model ID
00 00 41
Default device ID
dev byte 10H-1FH (17 in the MIDI implementation examples)
Suggested delay between messages
20 ms

Requesting a dump

Send a Roland data request RQ1: F0 41, device ID, 00 00 41 11, a 4-byte address, a 4-byte size, the checksum and F7. User patches A-1 to H-8 start at 20 00 00 00 to 20 3F 00 00; the temporary patch is at 10 00 00 00 and the system settings at 01 00 00 00.

SysEx pitfalls

Data over 256 bytes is sent in packets about 20 ms apart. With the extra edit mode, the envelope sliders send SysEx instead of control changes.

Source: Roland SH-01 MIDI Implementation v1.01 (Sep. 1, 2010), Data Transmission and Parameter Address Map ↗

Specifications

Synthesis
Virtual analog, three tones per patch; separate PCM sound generator (15 parts) for MIDI playback
Polyphony
64 voices
Multitimbrality
1 virtual analog part plus 15 PCM parts
Oscillators
1 per tone, 3 tones per patch: analog waveforms, noise and Supersaw, three variations each; ring modulation and sync between tones 1 and 2
Filter
Low-pass, band-pass, high-pass or peaking, -12 or -24 dB/octave
Memory
64 preset and 64 user patches; more on USB memory
Keyboard / format
37 full-size keys with velocity
Outputs
Output L/Mono and R, headphones; external input (stereo mini jack)
MIDI
MIDI In, Out; USB (audio and MIDI); USB memory port

Sources

to be verified

These notes have not been checked against the sources yet. Corrections are welcome in the comments.

  1. Roland SH-01 MIDI Implementation, Version 1.01, Sep. 1, 2010 ↗ — Model ID 00H 00H 41H, RQ1 and DT1 formats, 20 ms packet interval, address map with user patches
  2. Roland GAIA SH-01 specifications ↗ — Sound generator, polyphony, patch memory, keyboard, connectors, power, size
  3. Roland U.S. blog, Roland Synth Chronicle: 1973 - 2014 ↗ — Lists the GAIA SH-01 under 2010
  4. Paul Nagle, "Roland Gaia SH01", Sound On Sound, August 2010 ↗ — Review: oscillators, filter modes, GM2 engine via MIDI, envelope sliders send SysEx, verdict

Comments

0

Sign in to write a comment.

An unhandled error has occurred. Reload 🗙

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.