Roland V-Synth
The Roland V-Synth is a 61-key synthesizer introduced in 2003. Each patch combines two oscillators that can use analog modeling waveforms, sampled waves played through Roland's VariPhrase technology, or an external audio input. A modulator links the two oscillators, and two COSM processors shape the sound with filters, amp models, resonators and other types. Polyphony is up to 24 voices, depending on the load, and the instrument can sample directly through its own inputs. A Time Trip pad and twin D Beam controllers are used for performance. The V-Synth stores 512 patches and up to 999 waves. Its Data Transfer function sends patches, setup and system settings as Roland System Exclusive messages, all together or by range, so that they can be stored on a sequencer or copied to another V-Synth. Samples themselves are saved to the PC card slot or a computer over USB.
Sign in to upload or commentSysEx messages
0 filesThis instrument is still waiting for its first SysEx.
If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.
Upload a SysExSysEx guide
- Manufacturer ID
- 41
- Model ID
- 00 53
- Default device ID
- Device ID range 17-32; dev byte 10H-1FH (17 in the manual's examples)
- Suggested delay between messages
- 20 ms
Receiving a dump
1. In System mode, MIDI/USB page, set Rx Sys-Ex to ON. 2. Set Device ID to the value used when the data was transmitted. 3. Send the data to the V-Synth MIDI IN.
Sending a dump from the instrument
1. Connect the V-Synth MIDI OUT to the MIDI IN of the sequencer. 2. Touch the menu icon at the top right of the screen and choose Data Transfer. 3. In Source choose ALL (patch, setup, system), SETUP, SYSTEM or PATCH. For PATCH choose WORK with a FROM-TO range of patch numbers (001-512) or TEMP. 4. Get the sequencer ready to record and touch Execute. The display shows Transmitting... and then COMPLETED!. Touch ABORT to stop.
Requesting a dump
Send a Roland data request RQ1: F0 41, device ID, 00 53 11, a 4-byte address, a 4-byte size, the checksum and F7. User patches 001-512 start at 20 00 00 00 (to 23 7F 00 00); temporary patches of parts 1-16 start at 10 00 00 00.
SysEx pitfalls
Data over 256 bytes is sent in packets about 20 ms apart. With Tx Edit on, patch edits are sent as SysEx. Waves and samples are not part of the Data Transfer: they are saved to a PC card or over USB.
Source: Roland V-Synth Owner's Manual (2002), pp. 75-76, 97 and MIDI Implementation (Nov. 20, 2002) ↗
Specifications
- Synthesis
- Analog modeling, PCM/VariPhrase sample playback and external input, with COSM processing
- Polyphony
- 24 voices (varies with the load on the sound generator)
- Multitimbrality
- 16 parts via MIDI (the keyboard plays part 1); 16 zones
- Oscillators
- 2 per patch: Analog Modeling, PCM/VariPhrase or External Input, plus a modulator (4 types and MIX)
- Filter
- 2 COSM processors (15 types plus Thru), including TVF types with LPF, BPF and HPF at -12 or -24 dB/octave
- Memory
- 512 patches; 999 waves; 50 MB wave RAM (30 MB used by preset waves); PC card slot
- Keyboard / format
- 61 keys with velocity and channel aftertouch
- Outputs
- Main L/Mono and R, Direct L and R, headphones; inputs L/R (line/mic); S/P DIF coaxial and optical in/out
- MIDI
- MIDI In, Out, Thru; USB
Sources
to be verifiedThese notes have not been checked against the sources yet. Corrections are welcome in the comments.
- Roland V-Synth Owner's Manual (2002), with MIDI Implementation v1.00 ↗ — MIDI settings pp. 75-76, Data Transfer p. 97, Factory Reset p. 98, specifications p. 172, model ID 00H 53H and address map
- Roland 50th Anniversary: 2000s ↗ — Lists the V-Synth under 2003
- Paul Nagle, "Roland V-Synth", Sound On Sound, May 2003 ↗ — Review: polyphony in practice, USB storage, Data Transfer of patches via MIDI, verdict
Sign in to write a comment.
Comments
0