no image yet
Roland · Effect Processor · 2000

Roland VG-88

The Roland VG-88 V-Guitar System is a floor unit from 2000 that rebuilds the sound of an ordinary steel-string guitar with Roland's COSM modelling. A GK-2A or GK-3 divided pickup sends each string separately: the COSM Guitar section changes the pickups and body, the COSM Amp section models distortion, amplifier, speaker and microphone placement, and a multi-effects section finishes the sound. A normal pickup can be mixed in, and tunings can change from patch to patch. It holds 100 user patches alongside the factory presets, selected with number pedals, with an expression pedal and a backlit graphic display. Sound On Sound described it as the successor of the VG-8 at roughly half that unit's launch price, praised its freedom from the tracking delay of MIDI guitar synths, and noted that it is a modelling system rather than a true guitar synthesizer. The VG-88 saves its system settings and patches as Roland System Exclusive data. On the Bulk Dump page a range from a single patch to all patches and the system can be sent, and the Bulk Load page receives them back. Messages use model ID 00 27 and must match the unit's device ID, 1 by default.

SysEx messages

0 files

This instrument is still waiting for its first SysEx.

If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.

Upload a SysEx

SysEx guide

Manufacturer ID
41
Model ID
00 27
Default device ID
Device ID 1 (factory setting); range 1-32

Receiving a dump

1. Connect the sender's MIDI OUT to the VG-88 MIDI IN. 2. From the Play page press F6 (SYSTEM), then F5 (MIDI). 3. Check that the Device ID matches the one used when the data was sent. 4. Press PAGE to reach the BULK LOAD screen. 5. Send the data; when reception ends, press EXIT.

Sending a dump from the instrument

1. Connect the VG-88 MIDI OUT to the sequencer's MIDI IN. 2. From the Play page press F6 (SYSTEM), then F5 (MIDI). 3. Press PAGE to reach the BULK DUMP screen. 4. Press F1 (START) and choose the first patch or system with VALUE. 5. Press F4 (END) and choose the last patch or system. 6. Start recording, then press F6 (DUMP). 7. Press EXIT several times to return to the Play page.

Requesting a dump

The VG-88 answers a Roland data request (RQ1, command 11): F0 41, device ID, 00 27, 11, a 4-byte address, a 4-byte size, checksum, F7. It replies with DT1 messages only while the MIDI parameter screen is in the load-ready (Bulk Load) state, sending whole blocks defined by the upper two address bytes. The VG-88 never sends RQ1 itself.

SysEx pitfalls

Data is accepted only if the device ID matches, even with Omni on. With system version 1 bulk data is received only on the Bulk Load screen; the Version 2 MIDI implementation also allows the play screen. On MIDI Receive Error, slow down the sending device. Parameters of size 2 or more must not be split across messages.

Source: Roland VG-88 Owner's Manual pp. 69, 72, 74-75; VG-88 MIDI Implementation 1.00 (Mar. 2000) and 2.00 (Oct. 2002), pp. 2-3 ↗

Specifications

Synthesis
COSM modelling of guitars and amplifiers from a divided pickup, plus multi-effects
Memory
100 user patches plus factory preset patches
Keyboard / format
Floor unit with 4 number pedals, control pedal and expression pedal; GK-2A or GK-3 divided pickup input
Outputs
Output L (mono) and R, Guitar Output, Phones
MIDI
MIDI In, Out

Known issues and maintenance

A backup battery keeps patches and settings; BATTERY LOW appears when it runs down and it should be replaced by a Roland service centre to avoid losing the data.

Sources

to be verified

These notes have not been checked against the sources yet. Corrections are welcome in the comments.

  1. Roland VG-88 V-Guitar System Owner's Manual (2000) ↗ — Concept and features pp. 8-9, memory backup p. 11, device ID p. 69, bulk dump and load p. 72, troubleshooting and factory reset pp. 73-74, MIDI chart p. 75, specifications p. 76
  2. Roland VG-88 MIDI Implementation, Version 1.00, Mar. 1, 2000 ↗ — Model ID 00 27, RQ1 and DT1 formats, address map, conditions for receiving bulk data and requests
  3. Roland VG-88 MIDI Implementation, Version 2.00, Oct. 1, 2002 ↗ — Same model ID; bulk data also received in the play screen
  4. Roland US, VG-88 product page ↗ — Discontinued; COSM, GK-2A, 260 program memories in the spec table
  5. John Walden, Roland VG88, Sound On Sound, December 2000 ↗ — Review: successor of the VG-8, 19 guitar and 12 amp models, 160 presets and 100 user patches, no tracking delay

Comments

0

Sign in to write a comment.

An unhandled error has occurred. Reload 🗙

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.