Roland XP-10
The Roland XP-10 Multitimbral Synthesizer, from 1995, is an affordable 61-key keyboard with velocity. It plays up to 28 notes across 16 parts and follows General MIDI and Roland's GS format, so it can play GM and GS song files as well as being played live. It offers 338 preset tones and 16 drum sets, room for 256 user tones and 20 user drum sets, and 64 preset plus 64 user performances, each storing a whole live setup. Reverb and chorus offer eight types each. Roland aimed it at players who want simple operation: four keyboard modes (Single, Dual, X-Dual and Split), an arpeggiator that follows MIDI clock, two sliders for real-time control and a computer connector for Mac or PC. Roland's product page now marks it as no longer in production. The Bulk Dump function sends the user tones, user drum sets, user performances, or all of them with the system setup, as Roland System Exclusive messages that a sequencer can record and play back to restore the unit. The XP-10's own data uses model ID 7B, while GS parameters use the common GS model ID 42; both use the Roland data set and data request formats.
SysEx messages
0 filesThis instrument is still waiting for its first SysEx.
If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.
Upload a SysExSysEx guide
- Manufacturer ID
- 41
- Model ID
- 7B
- Default device ID
- Device ID 17 (byte 10H); range 1-32 (00H-1FH)
- Suggested delay between messages
- 40 ms
Receiving a dump
1. Press EDIT, select System Setup with VALUE -/+ and press ENTER. 2. Press 7 several times to reach Device ID# and set the number used when the dump was made. 3. Press 7 again to reach Rx System Excl. and set it to ON. 4. Press EDIT to leave. A bulk load overwrites the user area for the type of data received.
Sending a dump from the instrument
1. Press UTILITY, select Bulk Dump with VALUE -/+ and press ENTER. 2. Choose the type: Tone Dump (User: Tone), Drum Dump (User: Drum), Performance Dump (User: Performance) or Bulk Dump (All). 3. Start the sequencer recording and press ENTER. CANCEL stops the transmission. 4. The display shows Completed when done.
Requesting a dump
Data Request 1 (RQ1): F0 41, device ID, model ID (7B for XP-10 data, 42 for GS data), 11, a 3-byte address, a 3-byte size, checksum, F7. XP-10 blocks: 10 00 00 system setup, 20 00 00 user performances, 28 00 00 performance temporary, 30 00 00 user tones, 38 00 00 user drum sets.
SysEx pitfalls
The device ID of the dump must match the receiving XP-10. Play the recorded dump back at the tempo it was recorded at, or reception may fail. Bulk Dump (All) sends the receive switch as ON but does not send the device ID or the CTS/RTS setting. Data over 128 bytes is split into packets with at least 40 ms between them. Check Sum Error or MIDI Buff. Full! point to damaged or too fast data.
Specifications
- Polyphony
- 28 voices
- Multitimbrality
- 16 parts
- Memory
- 338 preset and 256 user tones; 16 preset and 20 user drum sets; 64 preset and 64 user performances
- Keyboard / format
- 61 keys with velocity
- Outputs
- Output L, R; headphones
- MIDI
- In, Out, Thru; computer connector (Mac, PC-1, PC-2, MIDI)
Known issues and maintenance
A backup battery keeps the memory while the power is off. Roland gives it a life of five years or more but recommends replacing it every five years; when it runs down the display shows Battery Low! (owner's manual pp. 5 and 65).
Sources
to be verifiedThese notes have not been checked against the sources yet. Corrections are welcome in the comments.
- Roland XP-10 Owner's Manual (1995), scanned PDF read as page images ↗ — Features p. 3, memory backup p. 5, Bulk Dump and Bulk Load pp. 57-58, error messages p. 65, MIDI Implementation version 1.00 of June 16 1995 pp. 79-84 with model IDs 42H and 7BH and the address block map, Main Specifications p. 95
- Roland XP-10 product page ↗ — Summary specifications (28 voices, 16 parts, GM/GS, arpeggiator, X-Dual, serial computer interface) and the note that the product is no longer in production
Sign in to write a comment.
Comments
0