no image yet
Roland · Synthesizer · 1998

Roland XP-60

The Roland XP-60 is a 61-key music workstation from 1998, the smaller version of the XP-80 and covered by the same owner's manual. It plays 64 voices over 16 parts from sampled waveforms, with 40 insert effect types plus reverb and chorus, and it adds an MRC Pro sequencer, an arpeggiator and a floppy disk drive. It holds 512 preset and 128 user patches, 64 preset and 32 user performances, and up to four SR-JV80 wave expansion boards can be fitted. The Data Transfer function sends user or temporary patches, performances, rhythm sets and the system settings as Roland System Exclusive messages, all together or one group at a time. The same data can also be requested from a computer with Roland data request messages, and the manual prints the full address map.

Sign in to upload or comment

SysEx messages

0 files

This instrument is still waiting for its first SysEx.

If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.

Upload a SysEx

SysEx guide

Manufacturer ID
41
Model ID
6A
Default device ID
Device ID Number 17-32 (dev byte 10H-1FH); the manual's display examples show 17
Suggested delay between messages
20 ms

Receiving a dump

1. Press SYSTEM, then F3 (MIDI) to open MIDI Param 1. 2. Set Rx Sys.Excl to ON. 3. Set Device ID Number to the value used when the dump was made. 4. In UTILITY > 5 Protect, set System Exclusive Message to OFF, otherwise incoming SysEx cannot rewrite the user memory. SysEx is not received in GM mode.

Sending a dump from the instrument

1. Press UTILITY. 2. Press F6 (Menu) to select Menu 1, then F4 (Xfer) to select Data Transfer. 3. Press F1 (to MIDI). 4. Move the cursor to Source and choose the data: ALL (USER or TEMP), PERFORM (USER 01-32, TEMP, CTRL), PATCH (USER 001-128 or TEMP), RHYTHM (USER 001-002 or TEMP) or SYSTEM. 5. Start recording on the sequencer, then press F6 (Execute). The display shows Transmitting... (EXIT interrupts it).

Requesting a dump

Send a Roland data request RQ1: F0 41, device ID, 6A 11, a 4-byte address, a 4-byte size, the checksum and F7. If the address and size are valid the XP-60 answers with DT1 messages. Main addresses: 00 00 00 00 system, 10 00 00 00 user performances, 10 40 00 00 user rhythm setups, 11 00 00 00 user patches.

SysEx pitfalls

Data larger than 128 bytes is sent in packets of 128 bytes or less, and successive DT1 messages need at least 20 ms between them. RQ1 and DT1 are ignored when Rx Sys.Excl is OFF and in GM mode. The System Exclusive Message protect in UTILITY > Protect blocks writing to user memory. Parameters marked for the JV-1080 in the address map are ignored by the XP-60.

Source: Roland XP-60/XP-80 Owner's Manual (1998), pp. 90-91, 161, 164, 217-221 ↗

Specifications

Synthesis
Sample-based (PCM waveforms with filter and amplifier per tone)
Polyphony
64 voices
Multitimbrality
16 parts (part 10 is the rhythm part)
Oscillators
8 MB of waveforms, expandable to 40 MB with up to four SR-JV80 wave expansion boards
Memory
512 preset and 128 user patches; 64 preset and 32 user performances; 8 preset and 2 user rhythm sets; 3.5 inch floppy disk drive
Keyboard / format
61 keys with velocity and channel aftertouch
Outputs
Mix output (stereo), direct output (stereo), headphones, click output
MIDI
MIDI In, Out, Thru

Sources

to be verified

These notes have not been checked against the sources yet. Corrections are welcome in the comments.

  1. Roland XP-60/XP-80 Owner's Manual (1998) ↗ — Scanned PDF read as images: XP-60 note on the title page, MIDI settings pp. 90-91, Data Transfer p. 161, Protect p. 164, MIDI implementation pp. 217-221, specifications p. 231
  2. Roland UK: XP-60 product page ↗ — Waveform memory 8 MB expandable to 40 MB, 40 insert effects, discontinued

Comments

0

Sign in to write a comment.

An unhandled error has occurred. Reload 🗙

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.