Sequential Circuits Mopho
The Mopho is a compact desktop monophonic analogue synthesizer, originally sold under the Dave Smith Instruments name and now supported by Sequential. Its voice is described by the manufacturer as similar to a single voice of the Prophet '08: two analogue oscillators, each with its own sub-octave generator, a Curtis low-pass filter switchable between 2-pole and 4-pole modes, three envelopes, four LFOs, a 16 x 4 step sequencer and an arpeggiator. An audio input lets it process external signals, and with nothing plugged in the left output is fed back into the input for deliberately unruly sounds. Sound On Sound's Gordon Reid reviewed it in August 2009 and called it "a superb little synthesizer", praising its classic monosynth sound, small size and modulation, while criticising laborious front-panel programming, a basic arpeggiator and the lack of a power switch. The Mopho keeps 384 programs in three banks of 128. From the Global menu it can send the current program, the current bank or all three banks as System Exclusive. Each program travels as one message carrying its bank and program number, so it returns to the same location when sent back. A computer can also request a single program, the edit buffer or the global settings.
Sign in to upload or commentSysEx messages
0 filesThis instrument is still waiting for its first SysEx.
If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.
Upload a SysExSysEx guide
- Manufacturer ID
- 01
- Model ID
- 25
- Default device ID
- None: messages carry no device ID (F0 01 25 ...)
Receiving a dump
1. Hold PROGRAM MODE briefly to open the Global menu. 2. Turn PROGRAM to the MIDI SysEx page. 3. Use + to set it to On. 4. Press PROGRAM MODE to return to program mode.
Sending a dump from the instrument
1. Hold PROGRAM MODE briefly to open the Global menu and check that MIDI SysEx is On. 2. Turn PROGRAM to the MIDI SysEx Dump page. 3. With + and - choose Current Program, Current Bank (128 programs) or All Banks (all 3 banks). 4. Press WRITE to start the transmission from MIDI Out.
Requesting a dump
Request Program Dump: F0 01 25 05 bank(0-2) program(0-127) F7. Request Edit Buffer: F0 01 25 06 F7. Request Global Parameters: F0 01 25 0E F7. The Mopho answers with Program Data F0 01 25 02 bank program, 293 packed bytes, F7; Edit Buffer Data F0 01 25 03, 293 packed bytes, F7; or Global data F0 01 25 0F with 20 nibbles for 10 parameters, F7.
SysEx pitfalls
MIDI SysEx must be On for both sending and receiving. Received programs are written to the bank and program number contained in the dump, overwriting what is there. The global data dump is only transmitted, never accepted. Program data is 256 bytes packed into 293 MIDI bytes (7 bytes plus one byte of high bits per 8-byte group). Sequential's loading instructions for MIDI-OX set the output buffers to 1024 and confirm reception by a blinking dot on the MIDI Channel page.
Source: Mopho Operation Manual v1.2 (Dave Smith Instruments, August 2009), pp. 13-14 and 41-44 ↗
Specifications
- Synthesis
- Analogue subtractive, monophonic
- Polyphony
- Monophonic
- Oscillators
- 2 analogue oscillators (sawtooth, triangle, saw/triangle, variable pulse) with hard sync, a sub-octave generator on each, white noise
- Filter
- Curtis analogue low-pass, switchable 2-pole (12 dB/oct) or 4-pole (24 dB/oct); self-oscillates in 4-pole mode
- Memory
- 384 programs in 3 banks of 128
- Keyboard / format
- Desktop module without keyboard
- Outputs
- Left and right unbalanced 1/4-inch outputs, 1/4-inch stereo headphone jack; 1/4-inch audio input
- MIDI
- MIDI In; MIDI Out switchable to MIDI Thru; Poly Chain
Known issues and maintenance
No power switch (Sound On Sound review). There is no full hardware reset: Reset Globals restores only the global settings. The manual describes a hidden calibration routine for filter and oscillator waveshapes (hold ASSIGN PARAMETER and press +), not needed in normal use.
Sources
to be verifiedThese notes have not been checked against the sources yet. Corrections are welcome in the comments.
- Mopho Operation Manual, Version 1.2, August 2009 (Dave Smith Instruments) ↗ — Connections, global parameters, program parameters, MIDI implementation, SysEx messages and packed data format, hidden functions
- Mopho product page (Sequential) ↗ — Specifications, Curtis filter, 384 programs, I/O, marked discontinued
- Mopho Factory Sounds (Sequential) ↗ — Official factory programs as SysEx and loading instructions
- Sequential support page ↗ — Lists Mopho, Mopho Keyboard, Mopho SE and Mopho x4 with their own manuals
- Gordon Reid, "Dave Smith Instruments Mopho", Sound On Sound, August 2009 ↗ — Review: DCOs with sub-oscillators, filter modes, banks, connections, no power switch, verdict
- Dave Smith Instruments Mopho, Vintage Synth Explorer ↗ — Cross-check only: production from 2008
Sign in to write a comment.
Comments
0