no image yet
Sequential Circuits · Synthesizer · 2020

Sequential Circuits Pro 3

The Pro 3 is a three-octave keyboard synthesizer sold under the Sequential name and shown at the NAMM show in January 2020. It is a hybrid: two analog voltage-controlled oscillators and a third, digital wavetable oscillator feed a choice of three analog filters, a four-pole low-pass taken from the Prophet-6, a four-pole transistor ladder and a two-pole state-variable filter taken from the OB-6. It plays one note at a time, or three in a paraphonic mode where each oscillator takes its own note. Around that core there are digital effects, a 16-track step sequencer, an arpeggiator and four control voltage inputs and outputs for work with modular systems. A special edition, the Pro 3 SE, adds a tilting panel and walnut trim. Memory holds 512 factory programs that cannot be erased and 512 user programs, in banks of 128. Programs travel as System Exclusive over the MIDI sockets or USB. From the global menu the Pro 3 sends the current program, the current bank or all four user banks together with the play lists; a received program goes back to the bank and location it was dumped from. Each program is a message of about 4.7 kB. The manual documents the message formats and the requests a computer can send to ask for a program, the edit buffer or the global settings.

Sign in to upload or comment

SysEx messages

0 files

This instrument is still waiting for its first SysEx.

If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.

Upload a SysEx

SysEx guide

Manufacturer ID
01
Model ID
31
Default device ID
None: dump and request messages carry no device or channel byte

Receiving a dump

1. Press GLOBAL. 2. With Soft Knob 1 select MIDI Sysex Enable and set it to On. 3. With Soft Knob 1 select MIDI Sysex Cable and with Soft Knob 3 choose USB or MIDI Port, the one the data will arrive on. 4. Send the file from the computer. Programs load into the bank and location they were dumped from and replace what is there.

Sending a dump from the instrument

1. Press GLOBAL. 2. With Soft Knob 1 select MIDI Sysex Cable and with Soft Knob 3 choose USB or MIDI Port. 3. With Soft Knob 1 select Dump Current Program, Dump Current Bank or Dump All User Banks (the last one also sends the play lists; Dump Playlists sends only those). 4. Press Soft Button 1 (Dump Now).

Requesting a dump

Program: F0 01 31 05, bank number, program number, F7. Edit buffer: F0 01 31 06 F7. Global parameters: F0 01 31 0E F7. The Pro 3 answers with a program data dump (F0 01 31 02, bank, program, data, F7), an edit buffer dump (F0 01 31 03, data, F7) or a global parameters dump (F0 01 31 0F, data, F7).

SysEx pitfalls

A program is 4096 bytes sent as 4690 MIDI bytes: every 7 data bytes are preceded by one byte holding their top bits. The global parameters dump is only transmitted on request; the Pro 3 ignores it when received. Factory banks F1-F4 cannot be overwritten. Loading the factory file from Sequential replaces the user programs. For MIDI-OX Sequential asks for Low Level Output Buffers Num and Size of 4096 and Auto-adjust Buffer Delays switched off. Add-on wavetables need a pause of 700 ms between files and must be loaded before the programs that use them.

Source: Sequential Pro 3 User's Guide, version 1.2, pp. 97, 102-103, 127-129 and 147-150 ↗

Specifications

Synthesis
Hybrid subtractive: analog oscillators and filters plus a digital wavetable oscillator and digital effects
Polyphony
Monophonic, with a 3-voice paraphonic mode
Oscillators
2 analog VCOs and 1 DSP wavetable oscillator (32 wavetables of 16 waves each; further wavetables load into user slots 33-64)
Filter
Three analog filters: 4-pole 24 dB/oct Prophet-6 low-pass, 4-pole 24 dB/oct transistor ladder, 2-pole 12 dB/oct OB-6 state-variable
Memory
512 factory programs (banks F1-F4, permanent) and 512 user programs (banks U1-U4), 128 per bank
Keyboard / format
Three-octave, full-size, semi-weighted Fatar keyboard with velocity and aftertouch
Outputs
Stereo main out (2 x 1/4 inch), stereo headphones, external audio input; 4 CV inputs, 4 CV outputs and gate out on 3.5 mm jacks
MIDI
MIDI In, Thru, Out 1 and Out 2 (5-pin DIN); USB (class-compliant MIDI, no audio)

Known issues and maintenance

Calibration. Oscillators and filters are calibrated at the factory; the global menu has a routine to recalibrate them and another for the wheels. Do not switch off while it runs. MIDI In and USB. The manual warns against using both at the same time: overlapping messages can make the Pro 3 respond unpredictably. Erratic behaviour is usually a MIDI feedback loop. Reset Globals in the global menu restores the default global settings.

Sources

to be verified

These notes have not been checked against the sources yet. Corrections are welcome in the comments.

  1. Sequential Pro 3 User's Guide, version 1.2 (February 2021) ↗ — Connections, program memory, global menu, SysEx dumps, calibration, troubleshooting and the MIDI implementation
  2. Sequential: Pro 3 (product page) ↗ — Specification list: oscillators, filters, sequencer, memory, keyboard, connections, the SE edition
  3. Sequential support: Pro 3 Sounds ↗ — Factory program banks as SysEx, how to load them, add-on wavetables and programs
  4. "NAMM 2020 - Sequential Pro 3", Sound On Sound news, 17 January 2020 ↗ — Launch in January 2020, US prices, outline of the instrument

Comments

0

Sign in to write a comment.

An unhandled error has occurred. Reload 🗙

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.