Sequential Circuits Prophet '08
The Prophet '08 is an eight-voice analog polyphonic synthesizer sold under the Dave Smith Instruments name, as a five-octave keyboard and as a desktop module. Sequential, as the company is now called, lists it as discontinued and still hosts its manual, operating system and sounds. Each voice has two digitally controlled analog oscillators, a Curtis low-pass filter that switches between 2-pole and 4-pole operation, analog VCAs, three envelopes and four LFOs. A program holds two layers that can be stacked or split across the keyboard, and a gated 16 x 4 step sequencer and an arpeggiator are built in. Sound On Sound reviewed it in February 2008. Gordon Reid praised the sound above all and called it "the sexiest little analogue synth I've played in years", while finding the rotary encoders a little wobbly. The PE version uses potentiometers instead of encoders for many controls. The Prophet '08 stores 256 programs in two banks of 128. From the front panel it can send the current program, the current bank or both banks as System Exclusive data. Each program travels as its own message, which carries the bank and program number. Sequential publishes the factory banks in the same format and warns that loading them overwrites the programs in memory.
Sign in to upload or commentSysEx messages
0 filesThis instrument is still waiting for its first SysEx.
If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.
Upload a SysExSysEx guide
- Manufacturer ID
- 01
- Model ID
- 23 (Special Edition: 24)
- Default device ID
- None: dump messages carry no device ID or channel
Receiving a dump
1. Press GLOBAL. 2. Step through the pages with +/YES until MIDI SysEx is shown. 3. Set MIDI SysEx to On. When it is Off the Prophet '08 ignores received SysEx messages.
Sending a dump from the instrument
1. Connect MIDI Out to the MIDI input of the computer or receiver and make sure MIDI SysEx is On. 2. Go to the Dump page: the display shows Dump (Hit Write). 3. With PARAM 2 choose Current Program, Current Bank (all 128 programs of the bank) or All Banks. 4. The WRITE switch blinks: press WRITE to start the transmission.
Requesting a dump
Request one program: F0 01 23 05, bank (0-1), program (0-127), F7. Request the edit buffer: F0 01 23 06 F7. Request the Global parameters: F0 01 23 0E F7. The Prophet '08 answers with a Program Data (02), Edit Buffer Data (03) or Global Parameters (0F) message.
SysEx pitfalls
A stored program is one message: F0 01 23 02, bank, program, 439 data bytes, F7. The 439 bytes hold 384 parameter bytes in packed form, seven bytes to each 8-byte packet. Received programs overwrite the programs in memory, so save a dump of your own programs first. The Global parameters dump is sent only on request and is not recognised when received. For MIDI-OX Sequential advises setting the low level output buffers to size 1024 and number 1024. If nothing arrives, check that a dot blinks on the MIDI Channel page and that MIDI SysEx is On.
Source: Dave Smith Instruments Prophet '08 Operation Manual, printed pp. 7-12 and 51-55 ↗
Specifications
- Synthesis
- Analog subtractive: analog signal path per voice, digitally generated LFOs and envelopes
- Polyphony
- 8 voices; 16 with a second Prophet '08 connected through Poly Chain
- Multitimbrality
- 2 layers per program (stack or split); MultiMode gives separate MIDI control of voices 1-4 and 5-8
- Oscillators
- 2 digitally controlled analog oscillators per voice: sawtooth, triangle, saw/triangle mix, pulse with pulse-width modulation; hard sync; white noise
- Filter
- Curtis analog low-pass filter per voice, 2-pole or 4-pole (self-resonating in 4-pole mode)
- Memory
- 256 programs in 2 banks of 128, each with 2 layers
- Keyboard / format
- 5 octaves, semi-weighted, velocity and aftertouch (also made as a desktop module)
- Outputs
- Main stereo output and Output B stereo output (1/4 inch unbalanced), headphones
- MIDI
- MIDI In, Out, Thru and Poly Chain
Known issues and maintenance
Encoders. Sequential states that some rotary encoders from one supplier wore out sooner than specified and were fitted to some units. After an operating system update the Global parameter EncMode must be set again: Non-Det for standard and Special Edition units, Detent for PE units. Calibration. If waveshapes or filter behaviour seem wrong, hold GLOBAL and press LFO 2. The Sound On Sound reviewer's filters tracked the keyboard properly only after this routine. Reset. GLOBAL + LFO 3 resets the Global parameters only. There is no full hardware reset: the factory programs are restored by loading the SysEx banks from Sequential. Outputs. A cable in Output B removes voices 5-8 from the Main outputs.
Sources
to be verifiedThese notes have not been checked against the sources yet. Corrections are welcome in the comments.
- Dave Smith Instruments Prophet '08 Operation Manual ↗ — Global parameters, Dump page, MIDI implementation with all SysEx messages, hidden functions and calibration
- Sequential: Prophet '08 Keyboard (product page) ↗ — Specifications, discontinued status, PE version
- Sequential: Prophet '08 Factory Program Banks ↗ — Factory banks as SysEx, how to load them, warning that loading overwrites memory
- Sequential: Prophet '08 troubleshooting ↗ — Encoder problem, calibration, resets, Output B behaviour
- Sequential: Prophet '08 operating system ↗ — OS versions, update by SysEx, EncMode setting after the update
- Gordon Reid, "Dave Smith Instruments Prophet 08", Sound On Sound, February 2008 ↗ — Eight voices, architecture, verdict, encoders, calibration
- Gordon Reid, "Dave Smith Instruments Prophet Rev 2", Sound On Sound, December 2017 ↗ — The Rev2 loads Prophet '08 programs
Sign in to write a comment.
Comments
0