Sequential Circuits Prophet-5 / Prophet-10 (Rev4)
This page covers the reissue of the Prophet-5 that Sequential announced on 30 September 2020, together with a ten-voice version, the Prophet-10. It is not the Sequential Circuits Prophet-5 of 1978: the maker calls the new instrument the Prophet-5 Rev4, and it is sold under the Sequential name. Both models share the same five-octave keyboard and panel, and desktop modules exist as well. The reissue is an analog polyphonic synthesizer built to reproduce all three revisions of the original. Each voice has two CEM 3340 oscillators and a four-pole low-pass filter, and a Rev switch chooses between two filter chips: the SSI 2140, the modern counterpart of the SSM 2040 used in Rev1 and Rev2, and the Curtis CEM 3320 of the Rev3. A Vintage knob loosens oscillators and envelopes step by step, from a stable 4 down to 1. New compared with 1978 are velocity, aftertouch, MIDI and USB. In Sound On Sound, Dave Stewart praised its authenticity and solid tuning and counted the price among its drawbacks. Memory holds 200 factory programs that cannot be erased and 200 user programs, in groups and banks of eight; the factory sounds of 1978 are among them. The Pgm Dump command sends the current program, a bank, a group, all user banks or everything as System Exclusive over MIDI or USB, and received programs return to the location they came from. As the reviewer noted, SysEx is the only way to archive patches.
Sign in to upload or commentSysEx messages
0 filesThis instrument is still waiting for its first SysEx.
If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.
Upload a SysExSysEx guide
- Manufacturer ID
- 01
- Default device ID
- None: dump and request messages carry no device or channel byte
Receiving a dump
1. Press GLOBALS, then program select button 6 (MIDI SysEx). 2. With GROUP SELECT and BANK SELECT choose USB or MIDI, the port the data will arrive on. 3. Press GLOBALS twice to exit. 4. Send the file from the computer. Programs replace those in the same group, bank and program location.
Sending a dump from the instrument
1. Press GLOBALS once (upper row), then program selector 6 (MIDI SysEx), and choose MIDI or USB with GROUP SELECT and BANK SELECT. 2. Press GLOBALS a second time (lower row), then program selector 7 (Pgm Dump): the RECORD button flashes. 3. With GROUP SELECT and BANK SELECT choose Program, Bank, Group, User banks or All (user and factory). 4. Press RECORD.
Requesting a dump
The MIDI implementation documents three requests, each made of F0, 01, the instrument ID, a command byte and F7: command 05 followed by bank and program number asks for a stored program, 06 for the edit buffer, 0E for the global parameters. The instrument answers with a program data dump (command 02), an edit buffer dump (03) or a global parameters dump (0F).
SysEx pitfalls
Program data is packed: every 7 data bytes are preceded by one byte holding their top bits. The parameters follow the order of the NRPN list and are padded with zeros to 128 bytes. The global parameters dump is only transmitted on request; the instrument ignores it when received. Factory programs cannot be overwritten. Loading the factory file replaces the user programs. In a stack or split program only a pointer to the second program is stored, so both programs must be saved to keep the combination. For MIDI-OX Sequential asks for Low Level Output Buffers Num and Size of 4096 and Auto-adjust Buffer Delays switched off.
Specifications
- Synthesis
- Analog subtractive
- Polyphony
- Prophet-5: 5 voices. Prophet-10: 10 voices
- Multitimbrality
- One sound at a time. With OS 2.0 the Prophet-10 (or a Prophet-5 with a voice expansion card) is bi-timbral: stack or split of two programs
- Oscillators
- 2 CEM 3340 VCOs per voice
- Filter
- 4-pole resonant low-pass per voice, switchable between the SSI 2140 (Rev1/Rev2 type) and the Curtis CEM 3320 (Rev3 type)
- Memory
- 400 programs: 200 permanent factory and 200 user programs, in 5 groups of 5 banks of 8 programs
- Keyboard / format
- Five-octave, semi-weighted Fatar keyboard with velocity and aftertouch; desktop module versions also exist
- Outputs
- Mono output (1/4 inch unbalanced) and stereo headphones; CV in, CV out, gate in and gate out
- MIDI
- MIDI In, Out and Thru (5-pin DIN); USB (class-compliant MIDI, no audio)
Known issues and maintenance
Calibration. Press TUNE to run the built-in calibration on first use, repeat it over the first days and after moving to a warmer or cooler place: the instrument learns the temperature range of the room. Do not switch off while it runs. Tuning. If it plays out of tune the manual says to check that transpose and master tune are at 0, the Vintage knob at 4 and Alt Tuning on normal, then to recalibrate. MIDI In and USB. The manual warns against using both at the same time. Globals reset. Hold RECORD and press GLOBALS; user programs are not erased. It is required after installing OS 2.0.
Sources
to be verifiedThese notes have not been checked against the sources yet. Corrections are welcome in the comments.
- Sequential Prophet-5 User's Guide, version 1.3 (February 2021) ↗ — Design of the reissue, connections, program memory, globals, SysEx dumps, calibration and troubleshooting
- Sequential Prophet-5 MIDI Implementation 1.4 ↗ — MIDI messages, controllers, NRPN list and the SysEx request and dump formats
- Sequential Prophet-5/10 OS 2.0 Addendum ↗ — Stack and split on the Prophet-10, how stacked programs are saved, new voice modes
- Sequential: Prophet-5 Returns (press release, 30 September 2020) ↗ — Announcement of the Prophet-5 and Prophet-10, availability in October 2020, prices
- Sequential: Prophet-5/10 (product page) ↗ — Specification list: oscillator and filter chips, memory, keyboard, connections, desktop module
- Sequential support: Prophet-5/10 Sounds ↗ — Factory program banks as SysEx and how to load them
- Dave Stewart, "Sequential Prophet-5 & Prophet-10", Sound On Sound, February 2021 ↗ — Review: comparison with the original, chips, strengths and drawbacks, SysEx as the only way to archive patches
Sign in to write a comment.
Comments
0