Sequential Circuits Tetra
The Tetra is a compact desktop four-voice analogue synthesizer, originally sold under the Dave Smith Instruments name and now supported by Sequential. Each voice follows the Mopho design: two analogue oscillators with hard sync and two sub-octave generators, white noise, a feedback path and a Curtis low-pass filter switchable between 2-pole and 4-pole, with three envelopes, four LFOs and a 16 x 4 step sequencer. It can play as a four-voice poly synth, as four independent mono parts on consecutive MIDI channels with four separate outputs, or as a voice expander for other Tetras and the Prophet '08 through Poly Chain. Sound On Sound's Gordon Reid reviewed it in March 2010 and called it "a super little synthesizer", while noting a limited arpeggiator, no audio input and no power switch. The Tetra holds 512 programs in four banks of 128, two of them the Prophet '08 factory programs, plus 128 combos that store four complete programs, one per voice. From the Global menu it can send the current program, a bank, all programs, a combo, all combos or everything as System Exclusive; each program travels with its bank and number and returns to the same location. Programs can also be exported in Mopho and Prophet '08 format, and a computer can request programs, combos, edit buffers and the global settings.
SysEx messages
0 filesThis instrument is still waiting for its first SysEx.
If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.
Upload a SysExSysEx guide
- Manufacturer ID
- 01
- Model ID
- 26
- Default device ID
- None: program and combo messages carry no device ID (F0 01 26 ...)
Receiving a dump
1. Hold the Mode (Program/Combo/Global) switch until the GLOBAL LED lights. 2. Turn SELECT to the MIDI SysEx page. 3. Use + to set it to On. 4. Press the Mode switch to leave the Global menu.
Sending a dump from the instrument
1. Hold the Mode switch until the GLOBAL LED lights and check that MIDI SysEx is On. 2. Turn SELECT to the MIDI SysEx Dump page. 3. With + and - choose Current Program, Current Prog Bank, All Progrm Banks, Current Combo, Combo Bank or All Progs Combos (the other choices export a program or bank in Prophet '08 or Mopho format). 4. Press WRITE to start the transmission.
Requesting a dump
Request Program: F0 01 26 05 bank program F7. Request Program Edit Buffer: F0 01 26 06 F7. Request Globals: F0 01 26 0E F7. Request Combo: F0 01 26 21 combo(0-127) F7. Request Combo Edit Buffer: F0 01 26 38 F7. Replies: Program Data F0 01 26 02 bank program + 446 packed bytes F7; Program Edit Buffer F0 01 26 03 + 446 bytes F7; Combo Data F0 01 26 22 combo + 1177 bytes F7; Combo Edit Buffer F0 01 26 37 + 1177 bytes F7; Globals F0 01 26 0F + 20 nibbles F7.
SysEx pitfalls
MIDI SysEx must be On for sending and receiving. Received programs go to the bank and program number contained in the dump, overwriting what is there. The global data dump is transmitted only, never accepted. Program data is 384 bytes packed into 446 MIDI bytes and combo data 1024 bytes into 1177 (7 bytes plus one byte of high bits per 8-byte group). Sequential's loading instructions set MIDI-OX output buffers to 1024; a dot blinks on the MIDI Channel page when data arrives.
Source: Tetra Operation Manual v1.3 (Dave Smith Instruments, September 2010), pp. 13-16 and 62-67 ↗
Specifications
- Produced
- 2009–2015
- Synthesis
- Analogue subtractive, four voices
- Polyphony
- 4 voices; up to 16 with four Tetras linked by Poly Chain
- Multitimbrality
- 4 parts in Multi Mode (one voice per part on four consecutive MIDI channels) or through combos
- Oscillators
- 2 analogue oscillators per voice (sawtooth, triangle, saw/triangle, variable pulse) with hard sync, two sub-oscillators (one and two octaves down), white noise
- Filter
- Curtis analogue low-pass per voice, switchable 2-pole or 4-pole; self-oscillates in 4-pole mode
- Memory
- 512 programs in 4 banks of 128 (banks 1-2 are the Prophet '08 factory programs) and 128 combos
- Keyboard / format
- Desktop module without keyboard
- Outputs
- Four unbalanced 1/4-inch outputs (1/Left, 2/Right, 3, 4; outputs 3 and 4 always direct voice outputs), 1/4-inch stereo headphone jack
- MIDI
- MIDI In; MIDI Out switchable to MIDI Thru; Poly Chain Out; USB type B (class compliant, MIDI only)
Known issues and maintenance
No power switch (Sound On Sound). There is no full hardware reset: Reset Globals restores only the global settings. The manual describes a hidden filter and waveshape calibration (hold ASSIGN PARAMETERS and press the Mode switch), not needed in normal use. MIDI In and USB should not be used at the same time.
Sources
to be verifiedThese notes have not been checked against the sources yet. Corrections are welcome in the comments.
- Tetra Operation Manual, Version 1.3, September 2010 (Dave Smith Instruments) ↗ — Connections, global parameters, SysEx dump menu, combos, Poly Chain, USB, MIDI implementation, SysEx messages, packed data format, hidden functions
- Tetra product page (Sequential) ↗ — Specifications, memory, I/O, dimensions; no longer in production
- Tetra Factory Sounds (Sequential) ↗ — Official factory banks as SysEx and loading instructions
- Mophos, Tetra, and Evolver Retiring (Sequential news, 14 October 2015) ↗ — Announcement that the Tetra was being retired
- Gordon Reid, "Dave Smith Instruments Tetra", Sound On Sound, March 2010 ↗ — Review: price, memory, Poly Chain, criticisms, verdict
- Dave Smith Instruments Tetra, Vintage Synth Explorer — Cross-check only: produced from 2009
Sign in to write a comment.
Comments
0