no image yet
TC Electronic · Effect Processor · 1998

TC Electronic Fireworx

The TC Electronic FireworX is a one-unit rack studio multi-effects processor from 1998. It offers about 40 effect algorithms grouped under twelve effect blocks, from dynamics, filters and distortion to vocoder, synth, pitch, chorus, delay, reverb and pan. Blocks can be placed freely in a routing matrix as long as processing power remains, and a large modifier system lets envelopes, LFOs, MIDI and pedals move almost any parameter. It holds 200 factory presets and up to 200 user presets, with more on PCMCIA SRAM cards. Audio runs through balanced XLR connectors with 24-bit converters, plus AES/EBU, S/PDIF and optical digital input and output at 44.1 or 48 kHz. Sound On Sound praised its sound and range of effects, and noted the lack of a global dry/wet control. From the Utility menu the FireworX sends all user presets as a MIDI bulk dump to a sequencer or another FireworX, and it can be set to receive them back. A Sysex device ID set on the MIDI page identifies the unit during these transfers.

SysEx messages

0 files

This instrument is still waiting for its first SysEx.

If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.

Upload a SysEx

SysEx guide

Manufacturer ID
00 20 1F

Receiving a dump

1. Connect the storing device to the FireworX MIDI In. 2. In the Utility menu choose MIDI to User Bank and press Enter. 3. The FireworX now waits for a bulk dump of user presets; play the dump back.

Sending a dump from the instrument

1. Connect the FireworX MIDI Out to a sequencer or another FireworX. 2. In the Utility menu choose User Bank to MIDI. 3. Press Enter twice: all user presets are sent.

SysEx pitfalls

Receiving a dump overwrites all existing user presets. The Sysex device ID on the MIDI page is used for bulk dumps to and from the unit; its range and the message format are not given in the user manual.

Source: TC Electronic FireworX User's Manual, pp. 44, 45, 48, 77

Specifications

Synthesis
Digital multi-effects, about 40 algorithms in 12 effect blocks with free routing and modifiers, 24-bit converters
Memory
200 factory presets, up to 200 user presets, more on PCMCIA SRAM cards up to 2 MB
Keyboard / format
1U rack unit, 483 x 44 x 208 mm
Outputs
Balanced XLR analogue inputs and outputs; AES/EBU, S/PDIF and optical (Toslink/ADAT) digital I/O; word clock input
MIDI
MIDI In, Out, Thru

Sources

to be verified

These notes have not been checked against the sources yet. Corrections are welcome in the comments.

  1. TC Electronic FireworX User's Manual (ManualsLib copy) — Presets, MIDI page, Sysex device ID, MIDI bulk dump procedures, implementation chart, technical specifications
  2. Hugh Robjohns, TC Electronic FireworX, Sound On Sound, June 1998 ↗ — Review: algorithms, I/O, card, strengths and weaknesses

Comments

0

Sign in to write a comment.

An unhandled error has occurred. Reload 🗙

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.