no image yet
Waldorf · Synthesizer

Waldorf Kyra

The Waldorf Kyra is a virtual analogue synthesizer whose sound engine runs on custom FPGA hardware rather than on a general-purpose DSP. Each voice has two oscillator groups that offer sawtooth, pulse, noise and a library of 4096 single-cycle waves at the same time, with sync, ring modulation, FM and a six-oscillator hypersaw, followed by emulations of classic ladder filters. The engine plays 128 voices across 8 Parts, and every Part has its own nine-module effects chain. Kyra is a desktop unit with four balanced stereo outputs, DIN MIDI In, Out and Thru, and USB that carries MIDI and eight stereo audio streams. It stores 3,328 Patches in 26 banks of 128, of which banks A to G are battery-backed RAM and H to Z are ROM banks written a whole bank at a time, plus 128 Multis. Patches and Multis are exchanged as SysEx over DIN MIDI or USB. From the MIDI configuration pages Kyra can send the edit buffer of the current Part, a whole Patch bank, or all Multis. Received bank dumps go into the bank chosen with Bulk Send/Receive Bank, which returns to Off at every power-up so that a stray dump cannot overwrite patches.

SysEx messages

0 files

This instrument is still waiting for its first SysEx.

If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.

Upload a SysEx

SysEx guide

Manufacturer ID
3E
Default device ID
SysEx Device ID 17

Receiving a dump

1. Make sure the SysEx Device ID matches the one used when the dump was saved (default 17). 2. In the System pages, open the MIDI configuration and set Bulk Send/Receive Bank to the RAM bank (A-G) that may be overwritten. 3. Send the bank file from the computer or the other Kyra. A bank takes about 45 seconds. 4. Set Bulk Send/Receive Bank back to Off. It also returns to Off at every power-up.

Sending a dump from the instrument

1. In the MIDI configuration pages, set Send Manual Dumps To to DIN MIDI or USB. 2. For Patches, choose the bank in Bulk Send/Receive Bank. 3. Activate Send Current Edit Buffer, Send Selected Bulk Bank or Send All Multis with the Value Up button.

SysEx pitfalls

A bank dump overwrites the whole bank selected in Bulk Send/Receive Bank without warning; a Multi dump overwrites all 128 Multis. A bank received while a ROM bank is selected is ignored: load it into RAM, then use Copy Patch Bank. An edit buffer dump never overwrites a stored Patch. A bank takes about ten seconds over DIN MIDI and is instantaneous over USB. Do not switch off while received patches are being stored.

Source: Waldorf Kyra User Manual, firmware 1.72, October 2019, pp. 25, 87-92; Waldorf, How to load Banks/Patches in Kyra ↗

Specifications

Synthesis
Virtual analogue synthesis on a custom FPGA engine, with single-cycle waves, hypersaw, sync, ring modulation and FM
Polyphony
128 voice channels; dual mode or dual filter patches use two per note; up to 32 notes per Part
Multitimbrality
8 Parts, each with its own 9-module effects unit
Oscillators
2 oscillator groups per voice (sawtooth, pulse, cycled waves, noise) plus a detunable sub oscillator each; 4096 single-cycle waves
Filter
Ladder filter emulations: low pass, band pass, high pass, 12 or 24 dB/octave, single or dual parallel
Memory
3,328 Patches in 26 banks of 128 (A-G RAM, H-Z ROM), 128 Multis
Keyboard / format
Desktop module without keyboard; Waldorf sells an optional 19-inch rackmount kit
Outputs
4 balanced stereo line output pairs, headphones; USB audio with 8 stereo streams
MIDI
In, Out, Thru; USB 2.0 MIDI

Known issues and maintenance

RAM Patches, Multis and settings are kept by an internal rechargeable battery that a full charge keeps for several months; if it runs flat the RAM patches are lost, so Waldorf advises connecting the unit to mains for a few hours each month and backing up before long storage.

Sources

to be verified

These notes have not been checked against the sources yet. Corrections are welcome in the comments.

  1. Waldorf, Kyra User Manual, firmware 1.72, October 2019 ↗ — Specifications pp. 8-9, memory, battery p. 137, SysEx Device ID and manual dumps pp. 87-92, MIDI implementation chart
  2. Waldorf, How to load Banks/Patches in Kyra (sound management) ↗ — Procedure for loading a SysEx bank, button sequences for the bank pages, factory bank layout
  3. Waldorf, FAQ Kyra EN ↗ — Support page with manual, firmware, factory sounds and driver downloads
  4. Waldorf, Desktop 19-inch Rackmount Kit for Iridium, Kyra, Waldorf M ↗ — Desktop form with optional rack kit
  5. Sound On Sound, Waldorf will build the Valkyrie synth and call it Kyra, 8 June 2018 ↗ — Announced launch at Winter NAMM, January 2019

Comments

0

Sign in to write a comment.

An unhandled error has occurred. Reload 🗙

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.