no image yet
Waldorf · Synthesizer · 1997

Waldorf Microwave II / XT

The Waldorf Microwave II is a wavetable synthesizer in a two-unit rack, reviewed by Sound On Sound in July 1997. Where the original Microwave had analogue filters, the Microwave II is entirely DSP-based. In each voice two oscillators drive two wave generators that move through wavetables of 64 entries; a mixer with ring modulation and noise, two digital filters, several envelopes, two LFOs and a modulation matrix follow. It plays 10 notes at once and combines up to 8 sounds in a Multi. This page also covers the Microwave XT and the XTk, which share the same operating system, user's manual and MIDI implementation. The XT, reviewed in October 1998, is an orange five-unit rack with a knob for most parameters and an input for processing external audio. The XTk, reviewed in March 2000, is the XT with a four-octave keyboard. Reviewer Paul Nagle wrote of the first model: "you simply must test-drive the Microwave II". Dumps are started from the front panel and can hold a single sound, a Multi, a Multi with its sounds, all sounds, all Multis, the wavetables, the global parameters or everything at once. No receive mode has to be switched on, but the Device ID must match. Messages begin F0 3E 0E. Single sounds dumped from the original Microwave are converted automatically on arrival, although they may not sound identical.

Sign in to upload or comment

SysEx messages

0 files

This instrument is still waiting for its first SysEx.

If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.

Upload a SysEx

SysEx guide

Manufacturer ID
3E
Model ID
0E
Default device ID
Global parameter Device ID, 0 to 126; 127 is a broadcast ID that is always accepted

Receiving a dump

1. No receive mode has to be activated. 2. Press the Global key and check that Device ID matches the Device ID used in the dump (dumps sent with the broadcast ID 127 are always accepted). 3. Store any program being edited: all edit buffers are cleared when data is received. 4. Send the dump to MIDI In. The data is received and stored in memory.

Sending a dump from the instrument

1. Hold Shift and briefly press Utility, then release Shift. The display shows the Dump page. 2. Turn the page dial to choose the dump: Sound, Multi, Arrangement (a Multi with all its sounds), All Sounds, All Multis, All Wavetables & Waves, Global Parameters or Everything. Multi and Arrangement are available only in Multi mode. 3. Confirm with Shift + Utility. The data is sent from MIDI Out; the instrument cannot be played while a long dump is running.

Requesting a dump

A sound is requested with F0 3E 0E, the device number, 00, two location bytes BB NN, a checksum equal to (BB + NN) masked to 7 bits, and F7. Locations: 00 00 to 00 7F are sounds A001 to A128, 01 00 to 01 7F are B001 to B128, 10 00 is all sounds, 20 00 the Sound mode edit buffer, 30 00 to 30 07 the edit buffers of the Multi instruments. Device number 7F addresses any unit. The manual also lists request messages for Multis (01), waves (02) and wave control tables (03).

SysEx pitfalls

Device ID. Sender and receiver must use the same Device ID. The instrument accepts the broadcast ID 127 but never sends it. Checksum. It is the sum of the data bytes masked to 7 bits; a checksum of 7F is always accepted. Edit buffers. Receiving a dump clears all edit buffers. Memory. The Dump page offers Reorganize Memory, which the manual recommends before sending many dumps to the instrument. Original Microwave sounds. Single sounds from the original Microwave are converted automatically, placed in the current edit buffer and must be stored by hand. Some modulation assignments may be dropped. System dump. The System entry of the Dump page sends the operating system itself, to update another Microwave II, XT or XTk.

Source: Waldorf User's Manual MicroWave II / MicroWave XT / XTk (rev. 25.10.99), pp. 94, 98-101 and 106

Specifications

Synthesis
Wavetable synthesis, entirely DSP-based
Polyphony
10 voices; the XTk can be expanded to 30 voices
Multitimbrality
Up to 8 sounds (Instruments) in a Multi
Oscillators
2 oscillators driving 2 wave generators per voice, plus ring modulator and noise; 65 ROM wavetables and 32 user wavetables, each with 64 entries
Filter
Two digital filters in series: Filter 1 with several types (24 dB and 12 dB low-pass and band-pass, 12 dB high-pass and others), Filter 2 a 6 dB low-pass or high-pass
Memory
256 sounds in banks A and B, 128 Multis, 32 user wavetables; 8 edit buffers
Keyboard / format
Microwave II: 2U rack module. Microwave XT: 5U rack module. XTk: 4-octave keyboard with pitch-bend and modulation wheels
Outputs
Main Out and Sub Out stereo pairs (4 jacks); the XT also has an Analog In jack for external audio
MIDI
MIDI In, MIDI Thru, MIDI Out

Known issues and maintenance

Operating system updates. The system is updated by playing a standard MIDI file of SysEx data to the instrument. The manual warns never to switch the unit off while the update is in progress. If an error is shown, repeat the update at a lower sequencer tempo with MIDI clock and timecode transmission disabled. XTk. An XTk needs system version 2.1.8 or later: installing an earlier version can cause total data loss and leave the instrument unusable. Unsaved edits. The 8 edit buffers are cleared when the unit is switched off and when a dump is received, so edited programs must be stored first. MIDI loop. With MIDI Clock Send on and both MIDI In and Out connected to a sequencer, a MIDI loop can hang the system. Reviewer's remarks. Sound On Sound (July 1997) listed the lack of effects other than a chorus and the external power supply as drawbacks of the Microwave II.

Sources

to be verified

These notes have not been checked against the sources yet. Corrections are welcome in the comments.

  1. Waldorf User's Manual MicroWave II / MicroWave XT / XTk (rev. 25.10.99) — Connections, wavetables, voice structure, Multi mode, global parameters, dumps, conversion of original Microwave sounds, OS update, technical data, SysEx format. Read on a third-party mirror of the Waldorf manual.
  2. Waldorf MicroWave II Bedienungsanleitung, p. 110 (System Exclusive data format) — Second copy of the SysEx format, used to cross-check the header bytes 3E and 0E and the message IDs
  3. Waldorf: Legacy Microwave II / XT / XTk Series ↗ — Official legacy page with the download links for documentation, sounds, system and tools
  4. Paul Nagle, "Waldorf Microwave II", Sound On Sound, July 1997 ↗ — 10 voices, 256 sounds and 128 Multis, filter types, DSP design, conversion of original Microwave sounds, criticisms and verdict
  5. Paul Nagle, "Waldorf Microwave XT", Sound On Sound, October 1998 ↗ — Differences between the XT and the Microwave II: knobs, audio input, five rack units, shared operating system
  6. Paul Nagle, "Waldorf Microwave XTk", Sound On Sound, March 2000 ↗ — The XTk as keyboard version of the XT, four octaves, expansion to 30 voices

Comments

0

Sign in to write a comment.

An unhandled error has occurred. Reload 🗙

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.