Waldorf Q
The Waldorf Q is a digital synthesizer introduced in 1999, built as a five-octave keyboard, as the Q Rack and later as the Q+. Each voice combines three oscillators that offer classic waveforms, wavetables in the tradition of the PPG and FM, with two multimode filters, while the Q+ adds sixteen analogue filters. The basic Q plays 16 voices, 32 with the expansion board, and the Q+ up to 100. A Multi mode with 16 instruments, a step sequencer, a 25-band vocoder and effects such as a comb filter and surround delay complete the instrument. The Q stores 300 Sounds, 100 Multis, 20 Drum Maps and 100 Patterns in flash memory, so it needs no backup battery, and its operating system is updated by playing a MIDI file of SysEx messages into it. Holding Shift and pressing Utility opens the dump page, where the Q can send the current Sound, Multi, Pattern, Drum Map or Arrangement, the global data, all programs of one type, or everything at once. It needs no receive mode: single programs arrive in the edit buffer and must be stored, while bulk data goes straight into memory. The Q can also receive sound dumps from the Waldorf microQ.
Sign in to upload or commentSysEx messages
0 filesThis instrument is still waiting for its first SysEx.
If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.
Upload a SysExSysEx guide
- Manufacturer ID
- 3E
- Default device ID
- SysEx ID 0 (the manual says to leave it on 0 with a single Q); range 0-126, 127 is broadcast
Receiving a dump
1. Leave all programs out of Edit mode: edit buffers may be overwritten. 2. Set the SysEx ID in the Global menu to match the dump. 3. Start the sender. No receive mode is needed. 4. Store any single Sound, Multi, Drum Map, Pattern or Arrangement that arrives in the edit buffer.
Sending a dump from the instrument
1. Press Shift+Utility: the display shows the dump page. 2. Turn the page dial to choose Sound, Multi, Pattern, Arrangement, Drums, Global Data, all Sounds, all Multis, all Drum Maps, all Patterns, BOOT, OS or All. 3. Press Shift+Utility again to start. The Q cannot be played during the dump.
SysEx pitfalls
The SysEx ID of sender and receiver must match; 127 is accepted by every Q but the Q never sends it. Single programs are lost at power-off unless stored. The Q can receive sound dumps from the microQ. Waldorf suggests erasing the flash memory before loading a complete new sound set.
Source: Waldorf Q User's Manual, January 2003 (OS 3.02, Q+ 3.53), pp. 136 and 151-154
Specifications
- Synthesis
- Digital virtual analogue and wavetable synthesis, with FM
- Polyphony
- Q: 16 voices, 32 with the expansion board; Q+: up to 100 voices
- Multitimbrality
- 16 instruments in Multi mode
- Oscillators
- 3 oscillators per voice: classic waveforms, wavetables, FM
- Filter
- 2 multimode filters per voice; Q+ adds 16 analogue filters
- Memory
- 300 Sounds, 100 Multis, 20 Drum Maps, 100 Patterns in flash memory
- Keyboard / format
- Q Keyboard: 5 octaves with pitch and mod wheels; Q Rack: rack module
- Outputs
- 6 analogue outputs (3 stereo pairs), S/PDIF coaxial output, stereo input
- MIDI
- In, Out, Thru
Known issues and maintenance
Holding MULTI at power-up erases all programs in the flash memory. Switching off during an operating system update can cause total data loss.
Sources
to be verifiedThese notes have not been checked against the sources yet. Corrections are welcome in the comments.
- Waldorf, User's Manual for the Q Synthesizer, Q Keyboard / Q Rack / Q+, January 2003 — Manufacturer manual in a third-party copy: memory, voices, SysEx ID, dump and receive procedures, OS update
- Waldorf, Legacy Q series ↗ — Introduced 1999, models, feature summary, download folders
- Waldorf, Legacy Q and Q+ Phoenix Edition ↗ — Specifications: voices, filters, memory, outputs, keyboard, MIDI
Sign in to write a comment.
Comments
0