Yamaha A4000
The Yamaha A4000 is a professional sampler in a two-unit rack case, sold alongside the A5000 and described in the same owner's manual. It shares the A5000's AWM2 sampling engine, 20-bit input converters, sampling rates up to 44.1 kHz, 4 MB of standard sample memory expandable to 128 MB, floppy drive, SCSI port and internal drive bay, but offers 64-note polyphony, 16 multitimbral parts and three effect blocks instead of six, and a single MIDI input. The manual says it loads all data created on the earlier A3000. Sound On Sound covered it in its April 2000 review of the A5000, listing the A4000 at 999 pounds and calling the two machines otherwise functionally identical. The A4000's System Exclusive dumps carry programs, samples with their wave data, sample banks, sequences and system settings, sent from the BULK DUMP command one item at a time or all together. A single sample can also be sent in the MIDI Sample Dump Standard format. The bulk header identifies the A4000 with the text LM 0474.
SysEx messages
0 filesThis instrument is still waiting for its first SysEx.
If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.
Upload a SysExSysEx guide
- Manufacturer ID
- 43
- Model ID
- 7A
Receiving a dump
1. Press UTILITY, then F6 (MIDI), and turn Knob 1 to the SysEx page. 2. Set Bulk Protect (Knob 3) to off. 3. Set Device# (Knob 4) to the sender's device number (1-16) or to all.
Sending a dump from the instrument
1. Set Device# on the UTILITY MIDI SysEx page (not off). 2. Press COMMAND/EXIT, highlight line 2 with Knob 1 and press Knob 4 to open BULK DUMP. 3. Choose the Bulk Type with Knob 2: Program, Sample, System or All. 4. For a program or sample bank set With Related on to include samples; for a sample choose Format normal, parameter or SDS#1-#1025 with Knob 3. 5. Select the program (Knob 4) or sample (Knob 5), press Knob 1 (EXEC) or Knob 5 (EXEC and continue), then Knob 5 (YES).
Requesting a dump
The manual documents a dump request F0 43 2n 7A followed by the ASCII header LM 0474, a two-letter data type (SY, PG, SB, SP, WD, SQ, OL), a 16-byte object name and F7. The sampler answers with the matching bulk dump.
SysEx pitfalls
Bulk data can include sample waves. Data bytes are sent as high and low nibbles in blocks of under 4096 bytes; from the second block the header is omitted. The checksum is an exclusive-or. Device# off disables bulk transfers; with all the A4000 accepts any device number but transmits to device 1. Bulk Protect on makes it ignore all received bulk data.
Source: Yamaha A5000/A4000 Owner's Manual, pp. 201, 216, 272-278 ↗
Specifications
- Synthesis
- Sampling, AWM2 tone generator
- Polyphony
- 64 notes
- Multitimbrality
- 16 parts
- Memory
- 128 programs; sample memory 4 MB standard, expandable to 128 MB with 72-pin SIMMs
- Keyboard / format
- 2U rack module
- Outputs
- Stereo Out L/Mono and R, Assignable Out L and R, phones; optional AIEB1 I/O expansion board
- MIDI
- MIDI In, Out, Thru
Known issues and maintenance
All data in internal memory, including samples, is lost at power off unless saved to disk.
Sources
to be verifiedThese notes have not been checked against the sources yet. Corrections are welcome in the comments.
- Yamaha A5000/A4000 Owner's Manual ↗ — UTILITY MIDI SysEx p. 201, BULK DUMP p. 216, specifications pp. 254-255 with A4000 values, MIDI data format pp. 272-284, chart dated 14 September 1999
- Yamaha Guide for Accompanying Disks (A5000/A4000) ↗ — Bundled floppy disks and CD-ROM libraries
- Derek Johnson and Debbie Poyser, Yamaha A5000, Sound On Sound, April 2000 ↗ — A4000 price and differences from the A5000
Sign in to write a comment.
Comments
0