no image yet
Yamaha · Synthesizer · 2001

Yamaha DX200

The Yamaha DX200 is a desktop synthesizer from 2001, one of the Loopfactory instruments sold alongside the AN200 and the SU200. Its synth part uses six-operator FM synthesis, the method of the DX7, followed by a resonant filter with its own envelope, an amplifier envelope, a pitch envelope and noise. Three rhythm parts play AWM2 sampled drum sounds. The FM part has 16 notes of polyphony and the rhythm parts 32. Everything is built around a 16-step sequencer: 256 preset and 128 user patterns, two scenes per pattern, ten songs, and a Free EG that records the movements of the sixteen knobs. The step buttons also work as a one-octave keyboard. Sound On Sound liked how the knobs make FM easy to edit and praised the free computer editor, but found the effects limited. The DX200 saves its user patterns, songs and system settings with a front-panel Bulk Send in three choices: patterns, songs or all. The dumps are Yamaha System Exclusive messages with model ID 62 for voice data and 6D for the rest. Playing a dump back into the unit in Pattern mode replaces all user data. It also accepts DX7-style voice bulk data.

SysEx messages

0 files

This instrument is still waiting for its first SysEx.

If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.

Upload a SysEx

SysEx guide

Manufacturer ID
43
Model ID
62 (voice), 6D (system, rhythm, songs)

Receiving a dump

1. Connect the sender's MIDI OUT to the DX200 MIDI IN. 2. Press PATTERN so that the DX200 is in Pattern mode. 3. Play the dump. The DX200 receives it automatically. All user data in the unit is overwritten.

Sending a dump from the instrument

1. Connect DX200 MIDI OUT to the recorder. 2. Hold SHIFT and press button 15 (MIDI BULK), repeatedly, to choose Pttn (128 user patterns), SonG (10 songs) or ALL (patterns, songs and system). 3. Start recording on the computer or data filer. 4. Press the flashing button 15 once to arm the send, then once more to start it. EXIT cancels.

Requesting a dump

The manual documents no dump request: the data format lists only bulk dump messages that the unit receives, and dumps are started from the panel.

SysEx pitfalls

Bulk dump format: F0 43 0n 62, byte count MSB and LSB, three address bytes, data, checksum, F7. The checksum makes the low 7 bits of address, byte count, data and checksum add up to zero. A bad checksum shows Err4, too much data at once Err2 (MIDI Buffer Full). The unit also receives DX7-style VCED, ACED, VMEM and AMEM bulk data.

Source: Yamaha DX200 Owner's Manual, pp. 108-109 (Tips 92-93), 114, 125-127, 144 ↗

Specifications

Synthesis
6-operator FM (filter with FEG, AEG, PEG, noise) plus AWM2 rhythm sounds
Polyphony
16 notes FM + 32 notes AWM2
Multitimbrality
4 parts: 1 FM synth part and 3 AWM2 rhythm parts
Oscillators
6 FM operators per voice, noise generator
Filter
Resonant filter with selectable type and its own envelope (FEG)
Memory
256 preset and 128 user patterns, 2 scenes per pattern, 10 user songs
Keyboard / format
Desktop unit; step buttons play as a one-octave keyboard with octave shift
Outputs
Output L (mono) and R (1/4 inch), stereo headphones
MIDI
MIDI In, Out

Known issues and maintenance

An internal lithium battery keeps the user data; when it runs low the display flashes Err1 and Yamaha asks for replacement by a dealer or authorised service. Factory Reset (power on holding SHOW VALUE, PATTERN and EXIT) restores the factory patterns and songs and erases user data. Memory Protect must be off to store.

Sources

to be verified

These notes have not been checked against the sources yet. Corrections are welcome in the comments.

  1. Yamaha DX200 Owner's Manual ↗ — Specifications p. 114, error messages, Factory Reset, Bulk Send pp. 108-109, MIDI data format pp. 125-127, MIDI implementation chart p. 144
  2. Derek Johnson and Debbie Poyser, "Classic FM? Yamaha DX200", Sound On Sound, July 2001 ↗ — Review: FM engine, editor, bulk dump to a data filer, praise and criticisms
  3. Yamaha Synth 40th anniversary: Sampling Units and Groove Gear ↗ — DX200 promoted as a Loopfactory instrument with the AN200 and SU200

Comments

0

Sign in to write a comment.

An unhandled error has occurred. Reload 🗙

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.