no image yet
Yamaha · Synthesizer · 1998

Yamaha FS1R

The Yamaha FS1R is a rack-mount tone generator released in 1998. It combines FM synthesis with a method Yamaha calls Formant Shaping: each voice has sixteen operators, eight voiced and eight unvoiced, arranged in one of 88 algorithms, and the formants they produce can be moved over time by formant sequences to give speech-like, shifting timbres. A multimode filter, two LFOs and three effect sections complete the voice. The module plays 32 notes and a performance combines up to four parts. The FS1R is closely related to the DX7 family: its presets include 1,152 original DX voices and it accepts voice data sent from DX and TX instruments. Sound On Sound praised the sound and called it an exciting synth, while criticising the small panel, the confusing operating system and the fact that formant sequences cannot be created on the unit itself. The memory holds 1408 preset and 128 internal voices, 384 preset and 128 internal performances and 90 preset formant sequences. From the UTILITY mode the FS1R sends the current edit buffer, one or all internal performances, one or all internal voices, or the system settings as System Exclusive data. Reception has two switches, one for System Exclusive and one for bulk dumps, and the device number must match on both sides. The byte format is documented in a separate Data List booklet.

Sign in to upload or comment

SysEx messages

0 files

This instrument is still waiting for its first SysEx.

If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.

Upload a SysEx

SysEx guide

Manufacturer ID
43
Default device ID
Device Num: off, 1-16 or all

Receiving a dump

1. Press UTILITY and select SYSTEM. 2. Set Rcv SysExcl to on. 3. Set RcvBulkDump to on (it is available only when Rcv SysExcl is on). 4. Set Device Num to the number used by the sender, or to all. 5. Send the data: Bulk Received appears for about one second.

Sending a dump from the instrument

1. Press UTILITY and select DUMPOUT. 2. With the CURSOR buttons or knob choose Current (edit buffer), Perform, Voice or System, then press ENTER. 3. For Perform or Voice, use the VALUE buttons to choose All or a single item. 4. Press ENTER to transmit, or EXIT to cancel. 5. Press EXIT to go back to the UTILITY menu or PLAY to return to play mode.

SysEx pitfalls

The device number of the receiver must match the FS1R's Device Num. DumpIntrval (UTILITY, SYSTEM) sets the pause between data blocks to 50, 100, 150, 200 or 300 ms: raise it if the receiver reports MIDI Buffer Full. Bulk data with a wrong size or checksum is ignored and reported as System Exclusive Data Size Error or System Exclusive Checksum Error. The DUMPOUT menu has no entry for internal formant sequences on their own; the manual says the Fseq memory can receive bulk Fseq data from another FS1R after it has been initialised. A single voice received from a DX or TX instrument goes to the voice edit buffer of part 1.

Source: Yamaha FS1R Owner's Manual (1998), pp. 11, 72, 76-78 and 82 ↗

Specifications

Synthesis
Formant Shaping and FM synthesis
Polyphony
32 notes (halved when the filter is used)
Multitimbrality
4 parts
Oscillators
16 operators per voice (8 voiced, 8 unvoiced), 88 algorithms
Filter
Multimode resonant filter per voice: low-pass (12, 18 or 24 dB per octave), high-pass, band-pass, band-reject
Memory
Voices: 1408 preset, 128 internal (64 if internal formant sequences are used). Performances: 384 preset, 128 internal. Formant sequences: 90 preset, up to 6 internal
Keyboard / format
Rack-mount module, 480 x 235 x 44 mm
Outputs
Stereo main outputs (L/MONO, R), individual outputs (L, R), headphones
MIDI
MIDI In, Out, Thru

Known issues and maintenance

Backup battery. The internal battery is not rechargeable and lasts about five years on average. When Battery Low appears at power-on, internal performances, voices and system data will be lost when the unit is switched off: the manual says to send them out with DUMPOUT and have Yamaha service replace the battery. Memory allocation. Changing between 128 internal voices and 64 voices plus 6 formant sequences erases the internal voice and formant sequence memories. Formant sequences cannot be created, edited or stored on the FS1R itself.

Sources

to be verified

These notes have not been checked against the sources yet. Corrections are welcome in the comments.

  1. Yamaha FS1R Owner's Manual (1998) ↗ — Synthesis overview, DX voices, UTILITY mode (system, dump out, initialize), alert messages, battery, specifications (p. 83). The Yamaha PDF is encrypted; the text was read in the Internet Archive copy listed next
  2. Yamaha FS1R Owner's manual, text copy at the Internet Archive — OCR text of the same manual, used to read it
  3. Debbie Poyser and Derek Johnson, "Yamaha FS1R", Sound On Sound, December 1998 ↗ — Review at release: UK price, filter types, polyphony with filter, DX7 compatibility, criticisms and verdict

Comments

0

Sign in to write a comment.

An unhandled error has occurred. Reload 🗙

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.