no image yet
Yamaha · Sound Module

Yamaha MU100

The Yamaha MU100 is a half-rack desktop tone generator for General MIDI and XG songs, with TG300B and C/M modes for older material. Its AWM2 engine plays 64 notes across 32 parts, received on two MIDI inputs or through a serial TO HOST port that carries two ports of 16 channels from a computer. The specifications list 1267 voices and 46 drum kits, 100 preset and 100 user Performances of up to four voices, and an effects section with reverb, chorus, variation, two insertion effects and EQ. A stereo A/D input mixes a microphone or instrument into the effects. A single XG Plug-in slot accepts the PLG100 boards, and a Voice Map switch chooses between the MU100 voice set and the older MU basic map for songs made on the MU50, MU80 and MU90. The Dump Out menu sends All data, Multi settings for 16 or 32 parts with or without the A/D parts, or the user Performances. XG settings travel as XG bulk dumps or single parameter changes (model ID 4C); Performances and system data use the native formats with model IDs 49 and 59.

Sign in to upload or comment

SysEx messages

0 files

This instrument is still waiting for its first SysEx.

If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.

Upload a SysEx

SysEx guide

Manufacturer ID
43
Model ID
4C (XG), 49 and 59 (MU100 native)
Default device ID
Device Number 1-16 or all (factory value not stated)

Receiving a dump

1. Press UTIL and open the System functions. 2. Set Receive System Exclusive (RcvSysExcl) to on. 3. Set the Device Number to match the dump, or to all.

Sending a dump from the instrument

1. Connect MIDI OUT to the recorder and set HOST SELECT to MIDI, or use TO HOST. 2. Press UTIL, select DUMPOUT and press ENTER. 3. Choose All, Multi (32 Parts, 16 Parts, 32 Parts + A/D, 16 Parts + A/D) or Performance (ALL or I001-I100) and press ENTER. 4. Press ENTER at Are you sure?; Transmitting... appears.

Requesting a dump

XG dump request F0 43 2n 4C hh mm ll F7; native requests use model ID 49 or 59 in the same layout. The address must be the start of a block and the reply is a bulk dump. Requests can only be blocked by setting Exclusive off.

SysEx pitfalls

Bulk dumps carry byte count, address and checksum. The MU100 also accepts MU80/MU50-format Internal Performance bulk dumps (model ID 49); its own Performances use model ID 59. Dump Interval (50-300) sets the pause between blocks; raise it if the receiver reports buffer full. XG System On needs about 50 ms.

Source: Yamaha MU100 Owner's Manual pp. 98, 145-151; MU100 Sound List & MIDI Data pp. 35-39 ↗

Specifications

Synthesis
AWM2 (Advanced Wave Memory 2) sample playback; XG, TG300B, C/M and Performance modes
Polyphony
64 notes
Multitimbrality
32 parts on 32 MIDI channels (MIDI IN A and B, or two ports via TO HOST)
Memory
1267 voices and 46 drum kits in ROM; Performances: 100 preset and 100 user
Keyboard / format
Desktop half-rack module without keyboard, 220 x 210 x 44 mm
Outputs
OUTPUT L and R (RCA), headphones (mini jack); inputs: A/D INPUT (stereo jack) and INPUT L/R (RCA)
MIDI
MIDI IN-A, MIDI IN-B, MIDI OUT, MIDI THRU, TO HOST serial port (RS-232C/RS-422)

Known issues and maintenance

A non-rechargeable backup battery keeps internal data; Battery Low! means Yamaha service must replace it. Multi settings are not saved in the unit. Installing or removing a plug-in board initialises some setup and multi-part settings.

Sources

to be verified

These notes have not been checked against the sources yet. Corrections are welcome in the comments.

  1. Yamaha MU100 Sound List & MIDI Data (1998) ↗ — MIDI data format pp. 28-59: parameter change, bulk dump and request formats with model IDs 4C, 49, 59 and 27 (pp. 35-39); implementation chart p. 60
  2. Yamaha MU100 Owner's Manual (1998) ↗ — Device Number p. 98, System functions pp. 145-147, Dump Out pp. 148-151, Show Exclusive p. 159, XG Plug-in pp. 163-167, specifications pp. 173-174
  3. Christopher Holder, Yamaha MU100R, Sound On Sound, November 1997 ↗ — Review of the rack model; context only

Comments

0

Sign in to write a comment.

An unhandled error has occurred. Reload 🗙

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.