Yamaha MU50
The Yamaha MU50 is a compact desktop tone generator from 1995 for General MIDI and XG song files. Its AWM2 sample-based engine plays 32 notes across 16 parts, with TG300B, C/M and Disk Orchestra modes for older material and a Performance mode that layers up to four voices on one channel. The specifications list 737 voices and 22 drum programs, and the unit offers reverb, chorus and variation effects. Besides the usual MIDI sockets it has a TO HOST serial port for a direct computer connection and a stereo input jack whose signal is mixed with the output. Sound On Sound reviewed it in September 1995 at 429 pounds, praising the effects routing and MIDI control while finding the sounds unexciting. The Dump Out menu sends All data, the Multi Part settings or the user Performances. XG settings travel as XG bulk dumps with model ID 4C, covering the XG system, effect, multi part and drum setup blocks; the system data and Performances use the native format with model ID 49, which Yamaha labels as shared by the MU80 and MU50. Multi settings are not stored in the unit, so a dump is the only way to keep them.
SysEx messages
0 filesThis instrument is still waiting for its first SysEx.
If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.
Upload a SysExSysEx guide
- Manufacturer ID
- 43
- Model ID
- 4C (XG), 49 (MU80/MU50 native)
- Default device ID
- Device Number 1-16 or all (factory value not stated)
Receiving a dump
1. Press UTIL and open the System functions. 2. Set Receive System Exclusive (RcvSysExcl) to on (default on). 3. Set the Device Number to match the dump, or to all.
Sending a dump from the instrument
1. Connect MIDI OUT to the recorder and set HOST SELECT to MIDI, or use TO HOST. 2. Press UTIL, select DUMPOUT and press ENTER. 3. Choose All, Multi Part or Performance (ALL or I001-I128) and press ENTER. 4. Press ENTER at Are you sure?; Transmitting... appears.
Requesting a dump
XG dump request F0 43 2n 4C hh mm ll F7; the native request uses model ID 49 in the same layout. The reply is a bulk dump. Requests can only be blocked by setting Exclusive off.
SysEx pitfalls
Bulk dumps carry byte count, address and checksum. Replies longer than 512 bytes are split into packets with at least 120 ms between them. Dump Interval (50-300, default 150) sets the pause between blocks; raise it if the receiver reports buffer full. XG System On needs about 50 ms. System Information is sent only in reply to a request.
Source: Yamaha MU50 Owner's Manual pp. 40, 96-101, 120-122; MU50 Sound List & MIDI Data pp. 12-14 ↗
Specifications
- Synthesis
- AWM2 (Advanced Wave Memory 2) sample playback; XG, TG300B, C/M, DOC and Performance modes
- Polyphony
- 32 notes
- Multitimbrality
- 16 parts on 16 MIDI channels
- Memory
- 737 voices and 22 drum programs in ROM; Performances: 32 x 4 preset and 128 user
- Keyboard / format
- Desktop module without keyboard, 220 x 210 x 44 mm
- Outputs
- OUTPUT R and L/MONO, headphones (stereo mini jack); stereo INPUT jack mixed with the output
- MIDI
- MIDI IN, MIDI OUT, MIDI THRU, TO HOST serial port (RS-232C/RS-422)
Known issues and maintenance
A backup battery keeps the internal memory; Battery Low! means Yamaha service must replace it. Multi settings cannot be saved in the unit and must be kept with Dump Out.
Sources
to be verifiedThese notes have not been checked against the sources yet. Corrections are welcome in the comments.
- Yamaha MU50 Sound List & MIDI Data (1995) ↗ — MIDI data format: XG and MU80/MU50 native bulk dumps, requests and parameter changes (pp. 12-14); implementation chart dated 16 February 1995
- Yamaha MU50 Owner's Manual (1995) ↗ — Device Number p. 40, Multi settings not stored p. 35, System functions pp. 96-97, Dump Out pp. 98-101, MIDI appendix pp. 120-122, errors p. 124, specifications pp. 125-126
- Paul Nagle, Yamaha MU50 and CBX-K1, Sound On Sound, September 1995 ↗ — UK price, input jack not routed to the effects, verdict
Sign in to write a comment.
Comments
0