no image yet
Yamaha · Drum Machine · 1984

Yamaha RX11

The Yamaha RX11 Digital Rhythm Programmer is one of Yamaha's first programmable drum machines, reviewed in Britain in October 1984 alongside the cheaper RX15. It plays 29 PCM drum and percussion voices stored in six wave ROMs, and holds 100 patterns and 10 songs of up to 255 parts. Data can be saved to cassette or to the same RAM-1 cartridges used for DX7 voices, and the machine has MIDI In and Out. Electronics and Music Maker judged the RX11 and RX15 excellent products and good value at launch. Over MIDI the RX11 sends and receives its whole pattern and song memory as a System Exclusive bulk dump. System Exclusive is switched off by default and must be set to AVAIL with a channel from 1 to 16. The dump is started from the front panel or by a bulk dump request from another device; the RX11 itself cannot send requests. Parameter change messages work only between two RX11 units.

Sign in to upload or comment

SysEx messages

0 files

This instrument is still waiting for its first SysEx.

If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.

Upload a SysEx

SysEx guide

Manufacturer ID
43
Default device ID
System Exclusive UNAVAIL by default; channel 1-16 when set to AVAIL (display shows 01)

Receiving a dump

1. Hold FUNCTION and press MIDI OUT. 2. Press MIDI OUT until the display shows SYS EXCL UNAVAIL. 3. Press +1/YES to select AVAIL, then press MIDI OUT. 4. At SYS EXCL CH set the channel of the sending device with the DATA ENTRY control and press MIDI OUT.

Sending a dump from the instrument

1. Set SYS EXCL to AVAIL and choose the channel as for reception. 2. When the display shows MIDI TRANSMIT? press +1/YES. All pattern and song data are sent; the display goes blank for a few seconds and returns to MIDI TRANSMIT? 3. Press -1/NO, set SYS EXCL back to UNAVAIL if wanted and press MIDI OUT to exit.

Requesting a dump

A bulk dump request received by the RX11 starts transmission of its bulk data. The RX11 does not transmit bulk dump requests.

SysEx pitfalls

Parameter change data can be exchanged only with another RX11. The manual limits bulk communication to another RX11 or peripherals designed for it.

Source: Yamaha RX11 Owner's Manual, MIDI Functions, pp. 26-30

Specifications

Synthesis
PCM sample playback
Oscillators
29 voices (6 x 256 kbit wave ROM)
Memory
100 patterns, 10 songs (up to 255 parts each)
Keyboard / format
Tabletop drum machine, 400 x 68 x 270 mm
MIDI
MIDI In, Out

Known issues and maintenance

The block diagram shows a 3 V backup battery that keeps the memory.

Sources

to be verified

These notes have not been checked against the sources yet. Corrections are welcome in the comments.

  1. Yamaha RX11 Digital Rhythm Programmer Owner's Manual (scan and OCR text on the Internet Archive) — MIDI functions and System Exclusive procedures pp. 26-30, cassette and cartridge pp. 21-25, specifications p. 32, block diagram p. 33
  2. Kendall Wrightson, "Yamaha RX11 & RX15", Electronics & Music Maker, October 1984 ↗ — Review: voice counts, event memory, cartridge slot, battery back-up, UK price, verdict, timing of the announcement

Comments

0

Sign in to write a comment.

An unhandled error has occurred. Reload 🗙

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.