no image yet
Yamaha · Drum Machine · 1987

Yamaha RX5

The Yamaha RX5 Digital Rhythm Programmer is a tabletop drum machine first shown at the Winter NAMM show in January 1987 and reviewed in Britain that April. It plays 12-bit PCM recordings: 24 internal voices, 28 more on a plug-in Waveform Data Cartridge and 12 RAM voices for edited sounds. It stores 100 patterns, 20 songs and 3 chains. The RX5 has 12 individual outputs as well as a stereo pair and headphones, and MIDI In, Out and Thru. Reviewers singled out its programming depth and its Tunable Note Mode, which lets a sequencer play the instruments at pitch on separate MIDI channels. Data can also be saved to a RAM4 cartridge or to cassette. Over MIDI the RX5 sends and receives a bulk dump of all its sequence and voice data. A Device Number must first be switched on and matched to the other unit. Transmission starts from the front panel or in answer to a dump request, and a received dump replaces everything in the machine's memory.

Sign in to upload or comment

SysEx messages

0 files

This instrument is still waiting for its first SysEx.

If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.

Upload a SysEx

SysEx guide

Manufacturer ID
43
Default device ID
Device Number OFF or 01-16 (MIDI Job #08); must be switched on

Receiving a dump

1. Turn Memory Protect off with UTILITY Job #03. 2. Press MIDI and select Job #08 (Device Number). Turn it on and set the number used by the sending device. 3. Press MIDI and select Job #09: the display shows Receive Bulk ?

Sending a dump from the instrument

1. Press MIDI and select Job #08. Set the Device Number to match the receiving device. 2. Set the receiving device to receive bulk data. 3. Press MIDI, select Job #10 (Transmit Bulk ?) and press +1/YES. The display shows Transmitting ! while all sequence and voice data is sent.

Requesting a dump

In Job #09 (Receive Bulk) pressing +1/YES sends a Bulk Dump Request to the external device. The RX5 also transmits its data when it receives a Bulk Dump Request with a matching Device Number.

SysEx pitfalls

A received bulk dump erases all data in the RX5; save to a cartridge or cassette first. With Memory Protect on, reception is refused and the display shows Memory Protected. Sending the factory pattern and song data takes about 10 seconds.

Source: Yamaha RX5 Owner's Manual, MIDI Jobs #08-#10 (approx. pp. 64-66), Utility Job #03, MIDI Implementation Chart ↗

Specifications

Synthesis
12-bit PCM sample playback
Oscillators
24 internal voices, 12 RAM voices, 28 voices on the Waveform Data Cartridge
Memory
100 patterns (up to 99 measures), 20 songs (up to 999 parts), 3 chains, 3 sets of key data
Keyboard / format
Tabletop drum machine, 439 x 340 x 88 mm
Outputs
Stereo L/Mono and R, 12 individual outputs, headphones
MIDI
MIDI In, Out, Thru

Known issues and maintenance

The manual warns of an internal lithium battery to be replaced only by service personnel. Memory Protect stays on after power-off and blocks loading and bulk reception.

Sources

to be verified

These notes have not been checked against the sources yet. Corrections are welcome in the comments.

  1. Yamaha RX5 Digital Rhythm Programmer Owner's Manual (scan and OCR text on the Internet Archive) — Specifications, memory protect, cartridge and cassette jobs, MIDI Jobs #08-#10 for bulk data, MIDI implementation chart, lithium battery warning
  2. Trevor Gilchrist, "Yamaha RX5", Music Technology, April 1987 ↗ — Launch at Winter NAMM January 1987, 12-bit samples, voice counts, 12 outputs, UK price, verdict
  3. David Mellor, "Yamaha RX5", Sound On Sound, April 1987 ↗ — Pattern and song memory, MIDI Thru, Tunable Note Mode, Waveform Data Cartridge, RAM4 cartridge, 12 outputs, price

Comments

0

Sign in to write a comment.

An unhandled error has occurred. Reload 🗙

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.