no image yet
Yamaha · Effect Processor

Yamaha SPX900

The Yamaha SPX900 is a 1U rack multi-effect processor. It offers 50 preset effect programs, including reverbs and early reflection effects, and 49 user memories where edited programs are stored, for 99 memories in total. Conversion is 16-bit at 44.1 kHz with a frequency response of 20 Hz to 20 kHz; the unit has one input and two outputs on phone jacks, switchable between -20 and +4 dBm. Programs can be recalled over MIDI through program change tables, and a memory protect function guards the user memories. The rear MIDI socket works as either Thru or Out. With the socket set to Out, the SPX900 sends its data as System Exclusive bulk dumps: all data, a single memory or the program change table with Bulk Out 1, and user early reflection patterns or system settings with Bulk Out 2. Dumps use the MIDI channel of the current bank, and another SPX900 accepts them only with memory protect off and the same channel.

SysEx messages

0 files

This instrument is still waiting for its first SysEx.

If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.

Upload a SysEx

SysEx guide

Manufacturer ID
43
Default device ID
MIDI channel of the currently selected program change bank

Receiving a dump

1. On the receiving SPX900 turn MEMORY PROTECT off in the Utility functions. 2. Make sure its MIDI channel matches the transmitting device. 3. Send the dump to its MIDI In.

Sending a dump from the instrument

1. Set the rear MIDI THRU/OUT switch to OUT. 2. Press UTILITY until BULK OUT 1 (ALL, MEM, BANK) or BULK OUT 2 (USER ER, SYSTEM) is shown. 3. Choose the data group and, for MEM, BANK or USER ER, the memory, bank or pattern number. 4. Press STORE to transmit.

Requesting a dump

The MIDI data format lists request messages with sub-status 2n (n = MIDI channel). Byte details were not legible.

SysEx pitfalls

Nothing can be sent while the rear socket is set to Thru. Reception needs memory protect off and a matching MIDI channel.

Source: Yamaha SPX900 Operating Manual, Utility BULK OUT 1 and 2 p. 29, connector panel p. 5, MIDI data format

Specifications

Memory
50 preset programs (ROM, 1-50) and 49 user memories (RAM, 51-99)
Keyboard / format
1U rack unit, 480 x 45.2 x 319 mm
Outputs
1 input, 2 outputs (L, R), unbalanced phone jacks, -20/+4 dBm switchable
MIDI
MIDI In, MIDI Thru/Out (switchable)

Sources

to be verified

These notes have not been checked against the sources yet. Corrections are welcome in the comments.

  1. Yamaha SPX900 Operating Manual (scan and OCR text on the Internet Archive) — Intro and specifications, connector panel p. 5, Utility functions pp. 27-29 (memory protect, bulk out), MIDI data format, MIDI Implementation Chart dated 4 November 1988

Comments

0

Sign in to write a comment.

An unhandled error has occurred. Reload 🗙

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.