no image yet
Yamaha · Synthesizer

Yamaha TX816

The Yamaha TX816 is a rack-mounted FM tone generator system: a MIDI rack frame that powers eight identical TF1 modules. Each TF1 is a six-operator FM synthesizer equivalent to the tone generator of the DX7, 16-note polyphonic, with its own MIDI input, its own balanced XLR output and a memory of 32 voices, each stored with 25 function settings such as portamento and controller response. The whole rack therefore holds 256 voices and, as reviewers pointed out, can play up to 128 notes with eight different sounds. The TX216 is the same frame sold with two modules, and TF1 modules can be added up to eight. A TF1 has only three switches and a two-character display, so voices cannot be programmed on it: they are edited on a DX synthesizer or a computer and sent over MIDI. UK reviews appeared in spring 1985, when David Ellis of Electronics & Music Maker called the system 'probably the most expensive, most complex and most impressive' of its kind. SysEx is central to the TX816. Each module accepts single-voice and 32-voice bulk dumps in the formats used by the DX7 and adds its own function ('performance') dumps. The Dump utility of a module sends its 32 voices followed by the function data through the common MIDI Out of the frame, always on channel 1. A DX7 receiving that dump keeps the voices and ignores the function data. The manual also documents a dump request message.

Sign in to upload or comment

SysEx messages

0 files

This instrument is still waiting for its first SysEx.

If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.

Upload a SysEx

From compatible models

Yamaha DX7

Related models: DX7

According to the TX816 owner's manual, its modules exchange voice data with the DX7.

#1749 · All Data Dump

a sysex dump of the 32 banks for internal sounds , i made an editor/librian for the dx then grouped or modified sounds to liking, its a sys ex file for the dx7 or tx816 charles......synth sounds

SysEx guide

Manufacturer ID
43
Model ID
none; formats 00, 01, 02, 09, 7D
Default device ID
MIDI channel: each module receives on its basic channel (1-16) or in Omni; always transmits on 1

Receiving a dump

1. On the module that must receive, press SW1 to choose the input: COMMON (the MIDI In on the frame, shared by all modules) or INDIVIDUAL (the MIDI In on the rear of that module). 2. Press SW2 to switch Memory Protect off (red LED off). Leave Memory Protect on for every other module: with COMMON selected, unprotected modules all load the same data. 3. Send the data. From a DX7: set SYS INFO AVAIL, select MIDI TRANSMIT and press YES. The Memory Protect LED lights while the data loads. 4. Press SW3 to reset the display, then SW2 to switch Memory Protect on again. For a dump coming from another TF1 the manual sets the receive basic channel of the module to 1. A 32-voice dump replaces all 32 voices; a single voice arrives in the edit buffer.

Sending a dump from the instrument

1. Hold SW3 until the Utility mode display appears, release it, then press SW3 once to reach the Dump sub-mode. 2. With the OUT SLOT selector on the frame choose the module to be dumped (1-8). 3. Press the YES switch (SW1) to start, or the NO switch (SW2) to skip. The module sends its 32 voices and then its function data from the common MIDI Out; this takes about 4 seconds and does not erase the module. A single program: selecting a program in Edit mode sends its function data and voice data.

Requesting a dump

Send F0 43 2n ff F7, where n is the MIDI channel (0-F) and ff the format number: 00 one voice, 01 one performance, 02 64 performances, 09 32 voices, 7D condition acknowledge. The answer leaves the common MIDI Out.

SysEx pitfalls

Bulk data is loaded only with Memory Protect off. A 32-voice dump (format 09) carries 4,096 data bytes and a single voice (format 00) 155; the function data travels as a 64-performance dump (format 02, 4,096 data bytes), of which a TF1 uses the first 32. The checksum is the two's complement of the sum of the data bytes. Only the common MIDI Out transmits, always on channel 1, for the module chosen with OUT SLOT. A DX7 receives the voices of a TF1 dump but not the function data. If a DX7 is switched on after the TX816, error 1 appears and must be cleared with a panel switch.

Source: Yamaha TX816/TX216 Owner's Manual: Utility mode and 'Dumping Data into a DX7' (about p. 33-34), 'TX816 MIDI Data Format' (about p. 52-61)

Specifications

Synthesis
Digital FM: 6 operators per voice; each TF1 module has a tone generator equivalent to the DX7's
Polyphony
16 notes per TF1 module (1 in mono mode); 8 modules in the TX816, 2 in the TX216
Multitimbrality
One voice per module, each module with its own MIDI input, receive channel and output: up to 8 voices at once on the TX816
Oscillators
6 operators per voice
Memory
32 programs per TF1 module (32 voices, each with function data): 256 voices in the TX816
Keyboard / format
None: MIDI rack frame, 480 x 176 x 346 mm, holding up to 8 TF1 modules
Outputs
One balanced XLR line output per module (8 on the TX816); no mixed output
MIDI
Frame: common In, Out, Thru. Each TF1 module: individual In and Thru

Known issues and maintenance

Backup battery. Each TF1 module keeps its memory with its own lithium battery (CR2032T in the service manual parts list), with a normal life of about five years according to the owner's manual. Utility mode shows the voltage multiplied by ten; the manual gives the replacement limit once as below 2.3 V and once as 2.2 V. Removing the battery erases the module: dump its data first. Memory Protect switches itself on at every power-up. Error codes. The ERROR LED lights with a number: 1 data receive error, 2 receive buffer full, 3 bulk data checksum error, 4 low battery, 5 to 10 internal faults for a Yamaha dealer. Any panel switch clears the display. No editing on the unit. Voices can only be changed from a DX synthesizer or a computer, and reviewers in 1985 complained that the modules must be loaded one at a time.

Sources

to be verified

These notes have not been checked against the sources yet. Corrections are welcome in the comments.

  1. Yamaha TX816/TX216 FM Tone Generator System Owner's Manual — System description, memory, battery, error codes, dump procedures, MIDI data format. Read as OCR text of a scan on the Internet Archive because yamaha.com refused the fetch tool.
  2. Yamaha TX216/TX816 Service Manual — Specifications of frame and TF1 module, battery part number, bulk formats, test program. OCR text of a scan on the Internet Archive.
  3. David Ellis, "Yamaha X-series MIDI System", Electronics & Music Maker, May 1985 ↗ — Review of TX816, QX1 and KX88: prices, 128 notes and 8 timbres, need for an external editor, criticisms, verdict
  4. "Synthcheck: Yamaha KX88/TX816", International Musician & Recording World, April 1985 ↗ — Review: prices of TX816, TX216 and TF1, modules described as DX7s, need for a DX7 or CX5 to alter sounds

Comments

0

Sign in to write a comment.

An unhandled error has occurred. Reload 🗙

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.