#3302 · Other
uploaded for the DX11
· 4 KB · 18 downloads
Download & send ›
The Yamaha V50 is a 61-key digital synthesizer reviewed as a new instrument in 1989. Yamaha's manual presents it as an all-in-one music production system: besides the synthesizer it contains an 8-track sequencer, a rhythm machine with sampled drum sounds, a digital effects unit and a 3.5 inch floppy disk drive. The sound comes from four-operator FM synthesis with eight algorithms and eight selectable waveforms. It plays 16 notes at once, and a performance can combine up to eight voices as separate instruments. The keyboard senses velocity and pressure. Sound On Sound's reviewer found nothing dramatically new in it, but praised the manual, the performance mode and the way the instrument brings together a playing keyboard and a writing tool. The same review notes that its voice parameters match those of the TX81Z and DX11. The V50 stores 100 internal voices and 100 internal performances next to 100 presets of each, and can also save to memory cards and disks. Over MIDI it sends bulk dumps of voices, performances, system setup, sequencer songs and rhythm data, started from the Exclusive page of the MIDI menu. According to the manual, voice data is compatible with the DX11, TX81Z, DX21, DX100 and several other Yamaha four-operator instruments. Internal memory protect is on every time the instrument is switched on and must be turned off before data can be loaded.
Sign in to upload or commentIf you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.
Upload a SysExThe V50 operating manual (p. 22) states that its voice data is compatible with the DX11 and the TX81Z.
1. Press MIDI, then the button under Exclusive. 2. Set the device number to the number used by the sender, or to all. With off, exclusive data is not transmitted. 3. Turn internal memory protect off (it is on at every power-up). 4. Send the data. Sequencer data is accepted only while the sequencer is stopped, and song data only if the current song is empty.
1. Press MIDI, then the button under Exclusive and check that the device number is not off. 2. Press the button under BULK. 3. Choose the data: VOICE or PFM (internal, preset or card; 00-24, 25-49, 50-74, 75-99 or ALL), SETUP, SEQ (all, data or setup) or R.SEQ (all, sequence or setup). 4. When the display shows Transmit ready?, confirm to send.
The manual lists dump requests of the form F0 43 2n, then the format number or header, then F7 (n = device number); for example F0 43 2n 03 F7 for the voice edit buffer and F0 43 2n 04 F7 for 32 voices. The full list is in Table 4 of the MIDI data format.
There is no single model ID: bulk messages start with F0 43 0n, followed by a format number (03 single voice, 93 data bytes; 04 block of 32 voices, 4096 data bytes) or by a text header beginning LM that names the data type. A single voice is received into the edit buffer and is lost unless stored. With the device number set to off nothing is sent; set to all, the V50 receives any device number and transmits as 1. The MDR function records bulk data from other instruments to disk, up to 64K bytes, and its IntTime setting adds a pause between blocks in steps of 100 ms on playback.
Source: Yamaha V50 Operating Manual, pp. 98-109 and 127-147 (Internet Archive copy, second part)
Backup battery. The manual gives the internal battery a life of about 5 years. When it runs low the first line of the display shows Change int battery!. Voice and performance data are lost when the battery is exhausted and also when it is replaced, so save to a card or disk first. Replacement is a job for a dealer or a Yamaha service centre. Memory protect. Internal and card memory protect are both on at every power-up. While internal protect is on, nothing can be stored and no card, disk or MIDI data can be loaded. MIDI data recorder. Using the MDR function clears the sequencer data.
These notes have not been checked against the sources yet. Corrections are welcome in the comments.
Sign in to write a comment.
Comments
0