Yamaha VL1
The Yamaha VL1 is a 49-key synthesizer built on Yamaha's Virtual Acoustic synthesis. Instead of playing samples it runs a physical model of an instrument: a driver such as a reed, lips or a bow excites a pipe or string, and the player shapes the result in real time with breath, wheels, pedals, velocity and aftertouch. Each of its two elements adds modifiers (harmonic enhancer, dynamic filter, equalizer, impulse expander, resonator) before the effects. Yamaha calls it basically a monophonic solo instrument; the two elements can play two notes or be layered. Sound On Sound reviewed it in July 1994 at a UK price of 3,999 pounds, praising how real its sounds felt and noting the time needed to learn it. A breath controller jack, two foot controller and two foot switch inputs, and a floppy disk drive are on board, and 128 voices are kept in battery-backed memory. Voice and system data travel as Yamaha universal bulk dumps with an ASCII header: single voices, all voices, the edit buffer, system settings and micro tuning tables. A single voice holds over 3,000 data bytes, which Sound On Sound noted is far larger than a DX7 patch.
Sign in to upload or commentSysEx messages
0 filesThis instrument is still waiting for its first SysEx.
If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.
Upload a SysExSysEx guide
- Manufacturer ID
- 43
- Model ID
- 7A (universal bulk, header LM 0117); 54 param
- Default device ID
- Device Number set on the Utility MIDI Setting page (factory value not stated)
Receiving a dump
1. Press UTILITY and select the System page. 2. Open 6:Miscellaneous and set Memory Protect to off. 3. Make sure the Device Number matches the data and the VL1 is not in Demo mode.
Sending a dump from the instrument
From the Utility mode Bulk screen, choose System, All Voice, a single Voice, the Current Voice or a Micro Tuning table. The button steps are in the Feature Reference manual.
Requesting a dump
Bulk Dump Request F0 43 2n 7A followed by the ASCII header, data type (VC voice, SY system), memory type (00 memory, 7F edit buffer), memory number and F7. The VL1 only receives requests.
SysEx pitfalls
Voice data are 108 common bytes plus 1480 bytes per element. Master tuning is sent in DX1 format and micro tuning in SY77/SY99 format. Device Number cannot be changed by parameter change. Reception may fail with Memory Protect on.
Specifications
- Synthesis
- Virtual Acoustic physical modelling (S/VA, Self-oscillating Virtual Acoustic synthesis), two elements
- Polyphony
- 2 notes (two elements; basically monophonic, elements usually layered)
- Oscillators
- Two elements, each a physical instrument model with its own controllers and modifiers
- Filter
- Dynamic Filter modifier per element, plus Harmonic Enhancer, Equalizer, Impulse Expander and Resonator
- Memory
- 128 voices (A01-H16) in battery-backed internal memory; 3.5 inch floppy disk drive
- Keyboard / format
- 49 keys with velocity and aftertouch
- Outputs
- OUTPUT L and R, headphones
- MIDI
- MIDI IN, OUT, THRU
Known issues and maintenance
Backup battery: the display shows Change battery! when it needs replacing by Yamaha service. Loading the factory disk overwrites the internal memory and needs Memory Protect off.
Sources
to be verifiedThese notes have not been checked against the sources yet. Corrections are welcome in the comments.
- Yamaha VL1/VL1-m/VL7 Version 2 Voice Lists & MIDI Data (1995) ↗ — MIDI data format pp. 12-20: bulk dump with additional header, parameter change, dump request, DX1 and SY77/99 compatibility, system parameter table with Device Number and Memory Protect
- Yamaha VL1 Owner's Manual 1, Getting Started (1993) ↗ — Model and elements pp. 8-15, controls pp. 16-20, MIDI data list p. 24, loading voice data and Memory Protect pp. 31-33, 128 voices p. 34
- Martin Russ, Yamaha VL1, Sound On Sound, July 1994 ↗ — Review: S/VA synthesis, two notes, UK price, factory file size, verdict
Sign in to write a comment.
Comments
0