Yamaha YS200
The Yamaha YS200 is a 61-key FM synthesizer with an eight-track sequencer. Its tone generator uses four operators and eight algorithms and plays eight notes at once. It holds 100 preset voices and 100 user voices, with room for 100 more on a RAM card, and adds ten digital effects such as reverb, delay and distortion. The keyboard responds to velocity and aftertouch, and a Multi mode plays up to eight voices on separate MIDI channels. The sequencer records eight songs of up to eight tracks. A 1988 Music Technology review counted about 10,000 notes of capacity and named the DX11 and TX81Z as close relatives; the YS100 is the same instrument without the sequencer. The YS200 sends and receives System Exclusive data. From the JOB menu it can dump the voice being edited, the 100 user voices or the system setup memory. Voices use the 93-byte VCED single-voice format and the 4096-byte packed 32-voice format, with extra universal blocks for additional voice parameters, effects and setup; sequencer songs can be requested as well. The manual says some voice parameters share the DX11 format but have no effect on the YS100/200.
SysEx messages
0 filesThis instrument is still waiting for its first SysEx.
If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.
Upload a SysExSysEx guide
- Manufacturer ID
- 43
- Default device ID
- MIDI transmit channel for dumps (s in F0 43 0s ...), receive channel for incoming data
Receiving a dump
1. Press JOB, then the SELECTOR button below MIDI, and set the receive channel to the sender's channel (or omni). 2. To receive the 100 user voices, press STORE and turn Memory Protect off (it is on at the factory). 3. Send the data from the computer or other device.
Sending a dump from the instrument
1. Press JOB. 2. Press the SELECTOR button below Bulk (MIDI BULK OUT). 3. Press the + SELECTOR button below the yes display of the data to send: edit voice, 100 user voices or system setup memory.
Requesting a dump
Dump requests on the receive channel n: F0 43 2n 03 F7 (voice edit buffer), F0 43 2n 04 F7 (packed 32 voices), F0 43 2n 0A F7 (song sequence, format 10), and universal requests F0 43 2n 7E with the ASCII header LM 8976AE, LM 8023AE, LM 8036EF or LM 8036S, then F7.
SysEx pitfalls
Format bytes from the manual: VCED f=3, 93 bytes; packed 32 voice f=4, 4096 bytes; universal bulk LM 8976AE (additional edit buffer 1, 23 bytes), LM 8023AE (additional edit buffer 2, 10 bytes), LM EFEDS (effect, 3 bytes), LM 8036S (system setup and performance, 100 bytes). Memory protect blocks reception of the packed 32-voice dump. When the 100 user voices are sent to a 32-voice synthesizer such as the DX11, only voices 75 to 99 arrive.
Specifications
- Synthesis
- FM, 4 operators, 8 algorithms
- Polyphony
- 8 notes
- Multitimbrality
- Multi mode: up to 8 voices, each with its own MIDI receive channel
- Oscillators
- 4 operators per voice
- Memory
- 100 preset voices (ROM), 100 user voices (RAM), 100 more on a 32 KB RAM/ROM card; 8 sequencer songs
- Keyboard / format
- 61 velocity-sensitive keys with aftertouch
- Outputs
- Output L and R, Phones
- MIDI
- MIDI In, Out, Thru
Sources
to be verifiedThese notes have not been checked against the sources yet. Corrections are welcome in the comments.
- Yamaha YS200 Owner's Manual (Image), scanned PDF read as page images ↗ — Overview p. 1, store and memory protect p. 27, job mode p. 28, MIDI Bulk Out and MIDI channel p. 29, specifications p. 71, MIDI Data Format pp. 72-92, MIDI Implementation Chart dated 7/16/1988 p. 100
- Ian Waugh, "Yamaha YS200", Music Technology, November 1988 ↗ — Review: price GBP 789 (YS100 GBP 699), 8-note polyphony, 8-voice multitimbral, 10 effects, sequencer of 10,000 notes, relatives DX11 and TX81Z, bulk out behaviour
Sign in to write a comment.
Comments
0