How to back up your synth with a SysEx dump
A SysEx dump is a copy of the memory of the instrument, sent out of its MIDI port and saved as a file on your computer. It is the standard way to back up a hardware synthesizer, a drum machine or an effect.
When to make one
- Now, if the instrument is old. Most instruments keep their memory alive with a small battery. When it runs out, the sounds you stored are lost.
- Before replacing that battery, and before a repair.
- Before loading a new bank, which replaces the sounds in memory.
- Before selling the instrument, to keep your own sounds.
What you need
A USB MIDI interface and a cable from the MIDI OUT of the instrument to the MIDI IN of the interface, or a USB cable if the instrument has a USB MIDI port. For this direction one cable is enough.
From the browser, with SysexDB
- Sign in and open the page of your instrument from the list of devices.
- Open “Receive from device” and press “Connect MIDI”. The browser asks your permission the first time.
- Choose the MIDI input that comes from the instrument and press “Start listening”.
- Start the dump from the panel of the instrument. The command is usually in the MIDI or utility menu, with a name like “Bulk Dump”, “Data Transfer” or “MIDI Data Dump”. Where the page has a “SysEx guide”, the steps for that instrument are shown right there.
-
When the instrument has finished, save the
.syxfile on your computer. You can also put it in the upload form, to share it or to keep it private in your account.
Receiving a dump works in Chrome, Edge and Firefox on a computer.
With a program on your computer
Windows: MIDI-OX. Choose your interface in Options › MIDI Devices, open View › SysEx, choose “Receive Manual Dump” in the SysEx menu, start the dump on the instrument and save what arrived.
macOS: SysEx Librarian. Press “Record One”, or “Record Many” if the instrument sends several messages, then start the dump on the instrument.
Linux: amidi. Run amidi -p hw:1,0,0 -r backup.syx with the port name shown by
amidi -l, start the dump on the instrument and press Ctrl+C when it has finished.
If the instrument has no dump command
Some instruments send their memory only when they are asked to, with a short SysEx message called a dump request. In that case you also need a cable from the interface to the MIDI IN of the instrument: start the recording, then send the request. Other instruments, mostly recent ones, do not send their memory over MIDI at all and make their backups on a memory card or over USB: the manual tells which.
Check the backup
- The same dump from the same instrument always has the same size: make it twice and compare.
- Upload the file to SysexDB, even as private: its page shows whether the messages are complete, whether the checksum is right and, for the formats the site knows, the names of the patches.
- Keep more than one copy. A file that exists in one place only is not a backup.
Share it, or keep it private
Factory sounds and banks you are happy to give away help every other owner: upload them as public. For the rest there is the private storage, up to 100 files per account, visible only to you: how it works. It is a convenience, not a replacement for your own copy.