What is a SysEx file?
Most MIDI messages are the same for every instrument: a note, a pedal, a knob. System Exclusive (SysEx for short) is the part of MIDI that each manufacturer defines for its own instruments. It carries what the standard messages cannot: the sounds stored in the memory of a synthesizer, the patterns of a drum machine, the presets of an effect, the global settings.
A SysEx file, usually with the extension .syx, is one or more of these messages saved
byte for byte on a computer. Send the file back to the instrument and it puts the data back in its memory.
What is inside a SysEx message
Every SysEx message has the same frame:
F0: the byte that opens every System Exclusive message.-
The manufacturer ID: one byte for the first companies that registered (
43Yamaha,41Roland,42Korg), or three bytes starting with00for the later ones. - The data, in a format chosen by the manufacturer: usually a device number or MIDI channel, a model ID, a command, then the sounds or the settings themselves, often followed by a checksum.
F7: the byte that closes the message.
For example, a bank of 32 voices of the Yamaha DX7 starts with
F0 43 00 09 20 00, carries 4,096 bytes of voice data and a checksum, and ends with F7:
4,104 bytes in all. You can see one byte by byte on the page of
this DX7 bank.
Between F0 and F7 every byte is lower than 80 hexadecimal: MIDI data bytes carry only
seven bits. Each manufacturer has its own way of packing ordinary 8-bit data into them, which is why a SysEx
file cannot be read without knowing the format of that instrument.
The usual kinds of SysEx file
- Single patch dump: one sound, usually loaded into the edit buffer or into one memory location.
- Bank or all data dump: all the sounds in memory, sometimes with patterns, songs and global settings. It replaces what is in the instrument.
- Dump request: a short message that asks the instrument to send its data. It contains no sounds.
Universal SysEx
Two IDs do not belong to a manufacturer: 7E and 7F open the universal
messages, defined by the MIDI standard for every instrument. Examples are the identity request, which asks an
instrument who it is, the General MIDI “system on” message and the MIDI Sample Dump Standard, used by many
samplers to exchange samples.
SysEx files and MIDI files
They are different things. A MIDI file (.mid) is a piece of music: notes and other events, each
with its time. A .syx file has no timing and no notes, only the raw messages. A MIDI file can
contain SysEx messages, for example to set up a sound module before the song starts.
Why SysEx files matter
Many instruments keep their memory alive with a small battery. When it runs out, after years or decades, every sound stored by the owner is gone, and often the factory sounds too. A SysEx dump is the backup: it brings back a bank in a minute. It is also how sounds are shared, since an instrument has no other way to hand its patches to another one.
A SysEx file works only on the instrument it was made for, or on models that share the same format. On SysexDB the page of a device lists the files uploaded for it and, where known, the compatible models.
What you can do on SysexDB
Every file has its own page with the structure of its messages, the checksum check, the patch names where the format is known and a hex view. From there you can download the file or send it to your instrument from the browser. Start from the list of devices.