no image yet
Yamaha · Synthesizer

Yamaha SY55

The Yamaha SY55 is a 61-key digital synthesizer with a built-in sequencer. Its sound comes from AWM2, Yamaha's second-generation 16-bit sample playback system: a voice layers one, two or four elements taken from 74 waveforms in 2 megabytes of ROM, and each element passes through two digital filters with their own envelopes. It plays 16 notes at once, up to 16 voices in multi-play mode, and adds 34 digital effects and an 8-track sequencer for eight songs. Music Technology reviewed it in April 1990 and described it as the TG55 tone generator with a keyboard and a sequencer added, with identical sounds. The reviewer found it "well priced for the extra facilities it offers" and regretted the single pair of stereo outputs. The SY55 keeps 64 voices and 16 multi-play setups in internal memory. Its Bulk Out job sends multis, voices, both together, the system settings or everything as System Exclusive data, and can also send sequencer songs and setup. Incoming dumps are refused until bulk protection, which switches on at every power-up, is turned off.

Sign in to upload or comment

SysEx messages

0 files

This instrument is still waiting for its first SysEx.

If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.

Upload a SysEx

From compatible models

Yamaha SY55 / TG55

Related models: TG55

According to the manuals of both, the SY55 and the TG55 exchange voice data.

SysEx guide

Manufacturer ID
43
Model ID
7A (format number); ID string 'LM 8103'

Receiving a dump

1. Press UTILITY and open the MIDI jobs with ENTER. 2. Set the MIDI device number to the number used by the sender (1 to 16) or to all. With off, bulk data is neither sent nor received. 3. Set bulk in protect to off. It switches back on every time the SY55 is powered on. 4. Send the data.

Sending a dump from the instrument

1. Press UTILITY and open the MIDI jobs with ENTER. 2. Check that the MIDI device number is not off. 3. Select the bulk out job and choose the data: for the synthesizer multi, voice, V & M (voices and multis), system or all; for the sequencer a song from 1 to 8, setup or all. 4. Press ENTER. The display asks "Sure?": answer with +1/YES. 5. The display shows "Now Transmitting" and then "Completed!".

Requesting a dump

Voice, multi and system data can be requested with F0 43 2n 7A (n = device number), followed by the 10-character name of the data (LM 8103VC, LM 8103MU or LM 8103SY), the memory type, the memory number and F7. Dump requests for sequencer data are not received.

SysEx pitfalls

Bulk protect. Bulk in protect is on after every power-up: data received while it is on is ignored and an error is shown. Device number. It works as the channel for System Exclusive data and must match on both devices. Sequencer. The manual lists errors for bulk data received while the sequencer is running and for song data received into a song that is not empty. Timing. When several dumps are sent in succession the SY55 leaves a break of more than 100 milliseconds between them. Checksum. A checksum error or a wrong byte count is reported on the display.

Source: Yamaha SY55 Operating Manual, Utility mode pp. 131-137, error messages pp. 144-146 and MIDI Data Format sheets

Specifications

Synthesis
AWM2 (second-generation 16-bit Advanced Wave Memory): sample playback with digital filters
Polyphony
16 notes: 16 with a 1-element voice, 8 with a 2-element voice, 4 with a 4-element voice
Multitimbrality
Up to 16 voices in multi-play mode
Oscillators
1, 2 or 4 AWM2 elements per voice; 74 preset waveforms in 2 megabytes of wave ROM; more on waveform cards
Filter
Two digital filters per element: filter 1 switchable low-pass or high-pass, filter 2 low-pass, each with its own envelope
Memory
64 preset and 64 internal voices; 16 preset and 16 internal multi-play setups; MCD32 card: 64 voices, MCD64 card: 128 voices
Keyboard / format
61 keys, initial and after-touch response
Outputs
OUTPUT L/MONO and R, PHONES
MIDI
IN, OUT, THRU

Known issues and maintenance

Backup battery. An internal battery keeps the contents of the internal memory. The manual says it should last about 5 years and must be replaced by Yamaha service personnel, not by the user. A low-battery message is shown when it is exhausted, and a song cleared at power-on can also indicate a battery problem.

Sources

to be verified

These notes have not been checked against the sources yet. Corrections are welcome in the comments.

  1. Yamaha SY55 Operating Manual (scan with OCR text on the Internet Archive) — Features, AWM2 voice structure, battery, Utility mode MIDI jobs, error messages, specifications p. 147, MIDI Data Format with bulk dump and dump request messages and the notes about the TG55
  2. Yamaha TG55 Operating Manual, German edition (scan with OCR text on the Internet Archive) — p. 109: the SY55 is named as a device that exchanges voice data and system messages with the TG55 on the same device number
  3. Ian Waugh, "Yamaha SY55", Music Technology, April 1990 ↗ — Review: a TG55 with keyboard and sequencer, identical sounds, UK price of GBP 1099, verdict and criticisms

Comments

0

Sign in to write a comment.

An unhandled error has occurred. Reload 🗙

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.