no image yet
Yamaha · Synthesizer

Yamaha TG55

The Yamaha TG55 is a one-unit rack tone generator based on AWM2, Yamaha's second-generation 16-bit sample playback system. A voice layers one, two or four elements taken from 74 waveforms in 2 megabytes of ROM; each element has its own envelopes and two digital filters. The module plays 16 notes at once across up to 16 voices in multi-play mode, and includes 34 digital effects and two individual outputs next to the stereo pair. Music Technology reviewed it in March 1990 and presented it as the AWM2 section of the SY77 in a rack, at a much lower price. The reviewer, Ian Waugh, rated it highly as an expander and praised the editing, the effects and the drum section, while noting that the presets are less imitative than a buyer might expect and that editing takes many pages. The SY55 keyboard is built on the same tone generator. The TG55 keeps 64 voices and 16 multi-play setups in internal memory. Its MIDI Bulk Out function sends multis, voices, both together, the system settings or everything as System Exclusive data. Incoming dumps are refused until bulk protection, which switches on at every power-up, is turned off.

Sign in to upload or comment

SysEx messages

0 files

This instrument is still waiting for its first SysEx.

If you own one, or can recover a dump from an old disk or backup, upload it here: every message helps the library and the community grow.

Upload a SysEx

From compatible models

Yamaha SY55 / TG55

Related models: SY55

According to the manuals of both, the SY55 and the TG55 exchange voice data.

SysEx guide

Manufacturer ID
43
Model ID
7A (format number); ID string 'LM 8103'

Receiving a dump

1. Press UTILITY, select the MIDI functions with PAGE and open them with ENTER. 2. Set the MIDI device number to the number used by the sender (1 to 16) or to all. Both devices must use the same number. 3. Set bulk in protect to off. It switches back on every time the TG55 is powered on. 4. Send the data.

Sending a dump from the instrument

1. Press UTILITY, select the MIDI functions with PAGE and open them with ENTER. 2. Check that the MIDI device number is not off: bulk out does not work while it is off. 3. Select MIDI bulk out and choose the data type: multi, voice, V&M (voices and multis), system or all. The MEMORY button chooses between internal and preset memory. 4. Press ENTER. The display asks "Sure?": answer with +1/YES. 5. Wait for "Completed!".

Requesting a dump

A dump can be requested with F0 43 2n 7A (n = device number), followed by the 10-character name of the data (LM 8103VC for a voice, LM 8103MU for a multi, LM 8103SY for system data), the memory type, the memory number and F7.

SysEx pitfalls

Bulk protect. Bulk in protect is on after every power-up: data received while it is on is rejected with an error message. Timing. The MIDI Data Format asks for an interval of more than about 100 milliseconds between successive bulk dumps, sent or received. Sizes. The size of a voice dump depends on the voice: the byte count field is 184 for a 1-element voice, 305 for 2 elements, 547 for 4 elements and 612 for a drum set voice; 186 for a multi and 42 for system data. Checksum. Each message ends with a checksum; a checksum error is reported on the display. SY55 data. A voice dump received from an SY55 sets the output selection to stereo L/R.

Source: Yamaha TG55 Operating Manual (German edition), Utility mode pp. 105-110, error messages pp. 114-115, MIDI Data Format pp. Add-1 to Add-17

Specifications

Synthesis
AWM2 (second-generation 16-bit Advanced Wave Memory): sample playback with digital filters
Polyphony
16 notes: 16 with a 1-element voice, 8 with a 2-element voice, 4 with a 4-element voice
Multitimbrality
Up to 16 voices in multi-play mode
Oscillators
1, 2 or 4 AWM2 elements per voice; 74 preset waveforms in 2 megabytes of wave ROM; more on waveform cards
Filter
Two filters per element: one switchable between high-pass and low-pass, one low-pass, with resonance
Memory
64 preset and 64 internal voices; 16 preset and 16 internal multi-play setups; voice data on MCD64 or MCD32 cards
Keyboard / format
1U rack module
Outputs
OUTPUT L/MONO and R, INDIVIDUAL OUTPUT 1 and 2 (rear); PHONES (front)
MIDI
IN, OUT, THRU

Known issues and maintenance

Backup battery. The manual says the internal backup battery should last about 5 years and must be replaced by qualified Yamaha service personnel. An error message is shown when its voltage is low.

Sources

to be verified

These notes have not been checked against the sources yet. Corrections are welcome in the comments.

  1. Yamaha TG55 Operating Manual, German edition (scan with OCR text on the Internet Archive) — Utility mode MIDI functions, card functions, error messages, specifications p. 116, MIDI Data Format with bulk dump, dump request and parameter change messages
  2. Yamaha TG55 Operating Manual, English edition, pages 1-79 only (scan with OCR text on the Internet Archive) — Table of contents, features, backup battery precaution, polyphony, MIDI OUT used for bulk dumps; the scan stops at p. 79, before the Utility mode
  3. Ian Waugh, "Yamaha TG55", Music Technology, March 1990 ↗ — Review: 1U rack, AWM2, filters, memory, outputs, bulk dump types and protect, UK price of GBP 749, verdict and criticisms
  4. Yamaha SY55 Operating Manual (scan with OCR text on the Internet Archive) — MIDI Data Format: same bulk dump names as the TG55 and the note on a TG55 receiving a bulk dump from the SY55

Comments

0

Sign in to write a comment.

An unhandled error has occurred. Reload 🗙

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.